VS Arduino - Print Page

VS Arduino
>> >> Configuration error VS2017CE https://www.visualmicro.com/forums/YaBB.pl?num=1492672715 Message started by YOSHIDASAN on Apr 20^th, 2017 at 7:18am

Title: Configuration error VS2017CE
Post by YOSHIDASAN on Apr 20^th, 2017 at 7:18am

Hi, i have some problem with ide location.

With 1.5 no error. Sad

And second problem in second picture.

1_005.PNG ( 18 KB | 1 Download )

2_005.png ( 8 KB | 8 Downloads )

Title: Re: Configuration error VS2017CE
Post by Visual Micro on Apr 20^th, 2017 at 7:40am

Hi,

Arduino 1.5 was released and superceeded a long time before the Esp was made.

Why have you used arduino 1.5?

Please install the latest arduino version (1.8.2). In Visual Micro remove the path you have set for Arduino 1.5 and set the path correctly for the Arduino 1.6/1.8 option.

Title: Re: Configuration error VS2017CE
Post by YOSHIDASAN on Apr 20^th, 2017 at 9:22am

Arduino latest version from the website. [1.8.2]
Specify the path to the IDE in section 1.6/1.8 and after Rescan choose a 1.6/1.8 and get this error message.
With section 1.5 and arduino 1.8 all works :(

3_001.PNG ( 25 KB | 2 Downloads )

Title: Re: Configuration error VS2017CE
Post by Visual Micro on Apr 20^th, 2017 at 9:26am

I see thanks.

Please close the explorer so you are just looking at an open project

Ensure the Visual Micro tool bar or vMicro menu shows arduino 1.6/1.8 not arduino 1.5

Switch on vmicro>compiler>verbose and "show build properties"

Then build and email the output as a .txt file to info[at]visualmicro.com

Thanks

Title: Re: Configuration error VS2017CE
Post by YOSHIDASAN on Apr 20^th, 2017 at 12:27pm

I solved the problem by clearing the folder "Arduino15" and installing all the libraries again. Dont know how its happen. Maybe some errors in configs.
You may delete this topic.

Title: Re: Configuration error VS2017CE
Post by Visual Micro on Apr 20^th, 2017 at 12:31pm

Okay thanks. Maybe caused by the unzip routine during hardware install. Did you use the arduino ide or visual micro board manager to install both times?

Title: Re: Configuration error VS2017CE
Post by YOSHIDASAN on Apr 20^th, 2017 at 1:00pm

From MS2017, libraries does not install completely, just creates empty folders, but not all, and some files.

In other words, it setups 10% or less. for example: setup esp8266 board v2.3.0, folder "tools" not contains any file.

Maybe need wait some more.
Not bad if there would be a display of any information about the installation. For example "progress bar" or displaying %.

Sorry for my english, it is not my native language.

Title: Re: Configuration error VS2017CE
Post by Visual Micro on Apr 20^th, 2017 at 2:19pm

Thank you I understand.

1)
I will look to update the zip library we use to see if that helps in the next release.

2)
You can use the Board Manager in the Arduino IDE to install. Then click Rescan in Visual Micro or restart the IDE. Visual Micro and Arduino uses the same compatible system.