VS Arduino | |
Visual Micro >> General Board >> Micro Debug Trace
https://www.visualmicro.com/forums/YaBB.pl?num=1499945951 Message started by Harrzack on Jul 13th, 2017 at 11:39am |
Title: Micro Debug Trace Post by Harrzack on Jul 13th, 2017 at 11:39am
Is it possible to have the Output Window, after a compile & upload, default to either nothing or Micro Build rather than the Micro Debug Message? And while I'm on that - is it possible to 'opt out' /disable the time stamp in the Debug Message? It makes the screen very 'noisy' and serves me no purpose. :D
=Alan R. |
Title: Re: Micro Debug Trace Post by Visual Micro on Jul 14th, 2017 at 9:09pm
The time stamp is an option on the vMicro>Debugger menu.
When debug is running the Micro Trace is displayed but if you switch to Release mode the Micro Build is displayed |
Title: Re: Micro Debug Trace Post by Harrzack on Jul 16th, 2017 at 4:52pm
Ok Tim - thanks. BUT - it would be nice if you could select debug trace (on/off) as an option. I compile and rebuild (always in debug) numerous times - and it would be a time saver if I could just set the DEFAULT display - and have it show nothing... ;)
=A. |
Title: Re: Micro Debug Trace Post by Visual Micro on Jul 17th, 2017 at 6:37pm
Yes good suggestion will do thanks
|
VS Arduino » Powered by YaBB 2.6.12! YaBB Forum Software © 2000-2024. All Rights Reserved. |