Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
1507.05 Sp6 (Read 987 times)
Visual Micro
Administrator
*****
Offline



Posts: 7556
United Kingdom
1507.05 Sp6
Jul 24th, 2015 at 12:10am
 
  • Programmers list only showed avr programmers unless the board had additional menu options
  • "Tools>Upload using programmer" renamed to "Use programmer for upload"
  • Selecting a programmer automatically switches on "Use programmer for upload"
  • Programmer can now be toggled on/off with less clicks.... If "Use programmer for upload" is ON, then clicking the selected programmer on the "programmers" menu un-selects the programmer and switches OFF "Use programmer for upload"
  • Validation and fix of Visual Studio C++ intellisense and syntax color for Arduino .ino and .pde source code is performed each time Visual Micro starts. Some users report that the installer sometimes fails to configure the code editor for C++ intellisense and color syntax code
  • In Atmel Studio, selecting the "Arduino Zero or Due" boards and then clicking "File>New>Arduino Project" creates an armgcc project instead of an avrgcc project.
  • Tip: If you switch between atmel 8 bit and 16 bit boards then delete the .cppproj from the sketch folder and re-open the [sketch].ino. This will cause a new project (cppproj) to be created of the correct type. This only applies to Atmel Studio and not Visual Studio. In future releases Visual Micro will prompt when changing board if the project needs to be re-created. (This is how Atmel Studio works and out of our control)
Back to top
 
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print