VS Arduino - Teensy Midi Defines

Apr 19^th, 2024 at 5:20pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

Teensy Midi Defines (Read 2173 times)

Olinskovs Newbies Offline Posts: 1 Joined: Aug 23^rd, 2015	Teensy Midi Defines Aug 23^rd, 2015 at 8:26pm	Print Post
	Hello, in the "Teensy for Microsoft Visual Studio and Atmel Studio" tutorial they say that if you want to set your teensy to midi mode you have to set the defines "as described below" but there is no "described below"!!! http://www.visualmicro.com/page/Teensy-for-Microsoft-Visual-Studio.aspx So what are the defines? Thx


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Teensy Midi Defines Reply #1 - Aug 23^rd, 2015 at 8:45pm	Print Post
	Hi, If you are talking about the defines in the "obsolete" section 2)? They are whatever each hardware is designed to provide which is installed with the teensy config under the arduinoide\hardware\teensy\teensy3\boards.txt. But section 2) is marked obsolete. Section 1), at the start of the page, shows how to use the menus such as "Tools>Visual Micro>Board options" to select the options. This is easier and in the background the correct defines are automatically set.
	« Last Edit: Aug 23^rd, 2015 at 8:47pm by Tim@Visual Micro »

	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›