Apr 25th, 2024 at 10:49am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Microchip Studio (Atmel Studio 7) › bootloader on a Atme2560 with Atmel ICE (ISP)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic bootloader on a Atme2560 with Atmel ICE (ISP) (Read 2995 times)
julien
Newbies
*
Offline


Posts: 1
Joined: Jun 28th, 2016
bootloader on a Atme2560 with Atmel ICE (ISP)
Jun 28th, 2016 at 3:34pm
Print Post  
I'am trying to burn a new bootloader on my atmega2560 but I have this problem:  

Burning a new bootloader
Burning bootloader to board 'Arduino/Genuino Mega w/ ATmega2560 (Mega 2560)' using 'Atmel Studio ATMEL-ICE (ISP)'
Error while burning bootloader.
Burn failed
avrdude: invalid isp clock delay specified 'ISP'


Any idea about solving this ? 
Thank you
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12076
Location: United Kingdom
Joined: Apr 10th, 2010
Re: bootloader on a Atme2560 with Atmel ICE (ISP)
Reply #1 - Jun 28th, 2016 at 8:21pm
Print Post  
Hi,

The burn boot loader option has historically been used with the programmers available for the "Arduino IDE" which doesn't include the ICE for AVR.

The Atmel programmer options are quite new and have been provided by users. They work for upload but have not been tested with the burn boot loader facility.

If you know of any missing switches or commands for atprogram.exe then please post and they will be added to the next release.

Otherwise you can switch on "vMicro>Compiler>Show build properties". Build and in the output window you will find the name of the bootloader file.

Then you should be able to use the Device programming tools in Atmel Studio. This link seems to be a close fit although with different board.programmer selected. https://startingelectronics.org/tutorials/arduino/arduino-uno-burning-bootloader...

If you don't get a chance to post switches it will be looked at during the next few months.

Thanks for the post.
  
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.