I have bought the board from Mouser
http://eu.mouser.com/ProductDetail/Arduino/GBX00003/?qs=%2fha2pyFadugB1qETnSDqLe... It’s an Genuino Zero and I use the programming USB port
I am using a paid Visual Micro and Visual Studio 2017 Community
The "Automatic debugging" is set
Just to clear things, I have off course tested this issue over and over again and my latest experience with this is the following:
I use the blink program with an integer that I use for the breakpoint:
void setup() {
pinMode(LED_BUILTIN, OUTPUT);
}
int i = 0;
void loop() {
digitalWrite(LED_BUILTIN, HIGH);
delay(1000);
i++; //I put my breakpoint here
digitalWrite(LED_BUILTIN, LOW);
delay(1000);
}
When I run it on an Uno it works both with or without breakpoints, the LED flashes and the F5 works
When I run the same program on the Genuino Zero the LED blinks when I have no breakpoints, but if I add a breakpoint the LED does not blink and the F5 icon is greyed out and not working
I really want this board up and running and I appreciate your effort trying to help me