VS Arduino - If com port changes, serial monitor doesn't open

Apr 19^th, 2024 at 9:02am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Installation & Troubleshooting › If com port changes, serial monitor doesn't open

‹ Previous Topic | Next Topic ›

Pages: 1

If com port changes, serial monitor doesn't open (Read 1253 times)

Bob Jones Full Member Offline Posts: 210 Location: Bellingham, WA Joined: Dec 4^th, 2015	If com port changes, serial monitor doesn't open Jan 6^th, 2018 at 10:08pm	Print Post
	I am running repeated tests of a couple robots. If I change from one to the other, the com port can change too. When this happens, the serial monitor doesn't open and I can't find a way to get it to open. The upload to the new port works, but the Serial Monitor won't open. How do I force it to open?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: If com port changes, serial monitor doesn't open Reply #1 - Jan 8^th, 2018 at 11:24pm	Print Post
	Hi after upload... If you have debug enabled the monitor will open for the upload port If you have debug enabled and have set a port override using "vMicro>Debugger>Local Port" the monitor will open on that port. If you have debug enabled and have set a port override set using F4 project properties then that port will always open in the monitor after upload. If you do not have debug enabled then the monitor will not open automatically after upload unless you have set vMicro>Upload>Show serial monitor. Does this help?


	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›