name=Nucleo-144
build.vid=0x0483
build.core=arduino
build.board=NUCLEO_F429ZI
build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial}
menu.pnum.NUCLEO_F207ZG=Nucleo F207ZG
menu.pnum.NUCLEO_F207ZG.node=NODE_F207ZG
menu.pnum.NUCLEO_F207ZG.upload.maximum_size=1048576
menu.pnum.NUCLEO_F207ZG.upload.maximum_data_size=131072
menu.pnum.NUCLEO_F207ZG.build.mcu=cortex-m3
menu.pnum.NUCLEO_F207ZG.build.board=NUCLEO_F207ZG
menu.pnum.NUCLEO_F207ZG.build.series=STM32F2xx
menu.pnum.NUCLEO_F207ZG.build.product_line=STM32F207xx
menu.pnum.NUCLEO_F207ZG.build.variant=NUCLEO_F207ZG
menu.pnum.NUCLEO_F207ZG.build.cmsis_lib_gcc=arm_cortexM3l_math
menu.pnum.NUCLEO_F429ZI=Nucleo F429ZI
menu.pnum.NUCLEO_F429ZI.node=NODE_F429ZI
menu.pnum.NUCLEO_F429ZI.upload.maximum_size=2097152
menu.pnum.NUCLEO_F429ZI.upload.maximum_data_size=262144
menu.pnum.NUCLEO_F429ZI.build.mcu=cortex-m4
menu.pnum.NUCLEO_F429ZI.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_F429ZI.build.board=NUCLEO_F429ZI
menu.pnum.NUCLEO_F429ZI.build.series=STM32F4xx
menu.pnum.NUCLEO_F429ZI.build.product_line=STM32F429xx
menu.pnum.NUCLEO_F429ZI.build.variant=NUCLEO_F429ZI
menu.pnum.NUCLEO_F429ZI.build.cmsis_lib_gcc=arm_cortexM4lf_math
menu.pnum.NUCLEO_F767ZI=Nucleo F767ZI
menu.pnum.NUCLEO_F767ZI.node=NODE_F767ZI
menu.pnum.NUCLEO_F767ZI.upload.maximum_size=2097152
menu.pnum.NUCLEO_F767ZI.upload.maximum_data_size=524288
menu.pnum.NUCLEO_F767ZI.build.mcu=cortex-m7
menu.pnum.NUCLEO_F767ZI.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_F767ZI.build.board=NUCLEO_F767ZI
menu.pnum.NUCLEO_F767ZI.build.series=STM32F7xx
menu.pnum.NUCLEO_F767ZI.build.product_line=STM32F767xx
menu.pnum.NUCLEO_F767ZI.build.variant=NUCLEO_F767ZI
menu.pnum.NUCLEO_F767ZI.build.cmsis_lib_gcc=arm_cortexM7lfsp_math
menu.pnum.NUCLEO_H743ZI=Nucleo H743ZI
menu.pnum.NUCLEO_H743ZI.node=NODE_H743ZI
menu.pnum.NUCLEO_H743ZI.upload.maximum_size=2097152
menu.pnum.NUCLEO_H743ZI.upload.maximum_data_size=524288
menu.pnum.NUCLEO_H743ZI.build.mcu=cortex-m7
menu.pnum.NUCLEO_H743ZI.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_H743ZI.build.board=NUCLEO_H743ZI
menu.pnum.NUCLEO_H743ZI.build.series=STM32H7xx
menu.pnum.NUCLEO_H743ZI.build.product_line=STM32H743xx
menu.pnum.NUCLEO_H743ZI.build.variant=NUCLEO_H743ZI
menu.pnum.NUCLEO_H743ZI.build.cmsis_lib_gcc=arm_cortexM7lfsp_math
menu.pnum.NUCLEO_H743ZI2=Nucleo H743ZI2
menu.pnum.NUCLEO_H743ZI2.node="NODE_H743ZI,NOD_H743ZI2"
menu.pnum.NUCLEO_H743ZI2.upload.maximum_size=2097152
menu.pnum.NUCLEO_H743ZI2.upload.maximum_data_size=524288
menu.pnum.NUCLEO_H743ZI2.build.mcu=cortex-m7
menu.pnum.NUCLEO_H743ZI2.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_H743ZI2.build.board=NUCLEO_H743ZI2
menu.pnum.NUCLEO_H743ZI2.build.series=STM32H7xx
menu.pnum.NUCLEO_H743ZI2.build.product_line=STM32H743xx
menu.pnum.NUCLEO_H743ZI2.build.variant=NUCLEO_H743ZI
menu.pnum.NUCLEO_H743ZI2.build.cmsis_lib_gcc=arm_cortexM7lfsp_math
menu.pnum.NUCLEO_L496ZG=Nucleo L496ZG
menu.pnum.NUCLEO_L496ZG.node=NODE_L496ZG
menu.pnum.NUCLEO_L496ZG.upload.maximum_size=1048576
menu.pnum.NUCLEO_L496ZG.upload.maximum_data_size=327680
menu.pnum.NUCLEO_L496ZG.build.mcu=cortex-m4
menu.pnum.NUCLEO_L496ZG.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_L496ZG.build.board=NUCLEO_L496ZG
menu.pnum.NUCLEO_L496ZG.build.series=STM32L4xx
menu.pnum.NUCLEO_L496ZG.build.product_line=STM32L496xx
menu.pnum.NUCLEO_L496ZG.build.variant=NUCLEO_L496ZG
menu.pnum.NUCLEO_L496ZG.build.cmsis_lib_gcc=arm_cortexM4lf_math
menu.pnum.NUCLEO_L496ZG-P=Nucleo L496ZG-P
menu.pnum.NUCLEO_L496ZG-P.node=NODE_L496ZG
menu.pnum.NUCLEO_L496ZG-P.upload.maximum_size=1048576
menu.pnum.NUCLEO_L496ZG-P.upload.maximum_data_size=327680
menu.pnum.NUCLEO_L496ZG-P.build.mcu=cortex-m4
menu.pnum.NUCLEO_L496ZG-P.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_L496ZG-P.build.board=NUCLEO_L496ZG_P
menu.pnum.NUCLEO_L496ZG-P.build.series=STM32L4xx
menu.pnum.NUCLEO_L496ZG-P.build.product_line=STM32L496xx
menu.pnum.NUCLEO_L496ZG-P.build.variant=NUCLEO_L496ZG
menu.pnum.NUCLEO_L496ZG-P.build.cmsis_lib_gcc=arm_cortexM4lf_math
menu.pnum.NUCLEO_L4R5ZI=Nucleo L4R5ZI
menu.pnum.NUCLEO_L4R5ZI.node=NODE_L4R5ZI
menu.pnum.NUCLEO_L4R5ZI.upload.maximum_size=2097152
menu.pnum.NUCLEO_L4R5ZI.upload.maximum_data_size=655360
menu.pnum.NUCLEO_L4R5ZI.build.mcu=cortex-m4
menu.pnum.NUCLEO_L4R5ZI.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_L4R5ZI.build.board=NUCLEO_L4R5ZI
menu.pnum.NUCLEO_L4R5ZI.build.series=STM32L4xx
menu.pnum.NUCLEO_L4R5ZI.build.product_line=STM32L4R5xx
menu.pnum.NUCLEO_L4R5ZI.build.variant=NUCLEO_L4R5ZI
menu.pnum.NUCLEO_L4R5ZI.build.cmsis_lib_gcc=arm_cortexM4lf_math
menu.pnum.NUCLEO_L4R5ZI-P=Nucleo L4R5ZI-P
menu.pnum.NUCLEO_L4R5ZI-P.node=NODE_L4R5ZI
menu.pnum.NUCLEO_L4R5ZI-P.upload.maximum_size=2097152
menu.pnum.NUCLEO_L4R5ZI-P.upload.maximum_data_size=655360
menu.pnum.NUCLEO_L4R5ZI-P.build.mcu=cortex-m4
menu.pnum.NUCLEO_L4R5ZI-P.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
menu.pnum.NUCLEO_L4R5ZI-P.build.board=NUCLEO_L4R5ZI_P
menu.pnum.NUCLEO_L4R5ZI-P.build.series=STM32L4xx
menu.pnum.NUCLEO_L4R5ZI-P.build.product_line=STM32L4R5xx
menu.pnum.NUCLEO_L4R5ZI-P.build.variant=NUCLEO_L4R5ZI
menu.pnum.NUCLEO_L4R5ZI-P.build.cmsis_lib_gcc=arm_cortexM4lf_math
menu.upload_method.MassStorage=Mass Storage
menu.upload_method.MassStorage.upload.protocol=
menu.upload_method.MassStorage.upload.tool=massStorageCopy
menu.upload_method.swdMethod=STM32CubeProgrammer (SWD)
menu.upload_method.swdMethod.upload.protocol=0
menu.upload_method.swdMethod.upload.options=-g
menu.upload_method.swdMethod.upload.tool=stm32CubeProg
menu.upload_method.serialMethod=STM32CubeProgrammer (Serial)
menu.upload_method.serialMethod.upload.protocol=1
menu.upload_method.serialMethod.upload.options={serial.port.file} -s
menu.upload_method.serialMethod.upload.tool=stm32CubeProg
menu.upload_method.dfuMethod=STM32CubeProgrammer (DFU)
menu.upload_method.dfuMethod.upload.protocol=2
menu.upload_method.dfuMethod.upload.options=-g
menu.upload_method.dfuMethod.upload.tool=stm32CubeProg
menu.xserial.generic=Enabled (generic 'Serial')
menu.xserial.none=Enabled (no generic 'Serial')
menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE
menu.xserial.disabled=Disabled (No Serial support)
menu.xserial.disabled.build.xSerial=
menu.usb.none=None
menu.usb.CDCgen=CDC (generic 'Serial' supersede U(S)ART)
menu.usb.CDCgen.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC
menu.usb.CDC=CDC (no generic 'Serial')
menu.usb.CDC.build.enable_usb={build.usb_flags} -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB
menu.usb.HID=HID (keyboard and mouse)
menu.usb.HID.build.enable_usb={build.usb_flags} -DUSBD_USE_HID_COMPOSITE
menu.xusb.FS=Low/Full Speed
menu.xusb.HS=High Speed
menu.xusb.HS.build.usb_speed=-DUSE_USB_HS
menu.xusb.HSFS=High Speed in Full Speed mode
menu.xusb.HSFS.build.usb_speed=-DUSE_USB_HS -DUSE_USB_HS_IN_FS
menu.opt.osstd=Smallest (-Os default)
menu.opt.oslto=Smallest (-Os) with LTO
menu.opt.oslto.build.flags.optimize=-Os -flto
menu.opt.o1std=Fast (-O1)
menu.opt.o1std.build.flags.optimize=-O1
menu.opt.o1lto=Fast (-O1) with LTO
menu.opt.o1lto.build.flags.optimize=-O1 -flto
menu.opt.o2std=Faster (-O2)
menu.opt.o2std.build.flags.optimize=-O2
menu.opt.o2lto=Faster (-O2) with LTO
menu.opt.o2lto.build.flags.optimize=-O2 -flto
menu.opt.o3std=Fastest (-O3)
menu.opt.o3std.build.flags.optimize=-O3
menu.opt.o3lto=Fastest (-O3) with LTO
menu.opt.o3lto.build.flags.optimize=-O3 -flto
menu.opt.ogstd=Debug (-g)
menu.opt.ogstd.build.flags.optimize=-g -Og
menu.rtlib.nano=Newlib Nano (default)
menu.rtlib.nanofp=Newlib Nano + Float Printf
menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float
menu.rtlib.nanofs=Newlib Nano + Float Scanf
menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float
menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf
menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float
menu.rtlib.full=Newlib Standard
menu.rtlib.full.build.flags.ldspecs=
menu.pnum.NUCLEO_F207ZG.tools.openocd.upload.openocdscript=target/target/stm32f2x.cfg
menu.pnum.NUCLEO_F429ZI.tools.openocd.upload.openocdscript=target/target/stm32f4x.cfg
menu.pnum.NUCLEO_F767ZI.tools.openocd.upload.openocdscript=target/stm32f7x.cfg
menu.pnum.NUCLEO_L496ZG.tools.openocd.upload.openocdscript=target/stm32l4x.cfg
menu.pnum.NUCLEO_L496ZG-P.tools.openocd.upload.openocdscript=target/stm32l4x.cfg
menu.pnum.NUCLEO_L4R5ZI.tools.openocd.upload.openocdscript=target/stm32l4x.cfg
menu.pnum.NUCLEO_L4R5ZI-P.tools.openocd.upload.openocdscript=target/stm32l4x.cfg
menu.upload_method.stlinkv21=STLink v2.1 + OpenOCD (vMicro)
menu.upload_method.stlinkv21.upload.tool=openocd
menu.upload_method.stlinkv21.upload.openocddebugger=stlink-v2-1.cfg
runtime.ide.path=C:\Program Files (x86)\Arduino
runtime.os=windows
build.system.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\system
runtime.ide.version=10808
target_package=STM32
target_platform=stm32
runtime.hardware.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32
originalid=Nucleo_144
upload.8dot3=false
tools.gdb.pre_init.tool=openocd
tools.gdb.cmd=arm-none-eabi-gdb.exe
tools.gdb.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.gdb.pattern="{path}/{cmd}" -interpreter=mi -d "{build.project_path}"
tools.gdb.openocd.cmd=bin/openocd.exe
tools.gdb.openocd.path={runtime.vm.ide.tools.openocd.path}
tools.gdb.openocd.params.verbose=-d2
tools.gdb.openocd.params.quiet=-d0
tools.gdb.openocd.pattern="{path}/{cmd}" -l "{{build.path}/{build.project_name}_DebugOpenOCD.log}" -s "{path}/scripts/" -f "{path}/scripts/{build.openocdscript}" -c "init"
tools.openocd.debug.path={runtime.tools.openocd-0.10.0.1.path}
tools.openocd.debug.cmd=bin/openocd.exe
tools.openocd.debug.cmd.windows=bin/openocd.exe
tools.openocd.debug.params.verbose=-d2
tools.openocd.debug.params.quiet=-d0
tools.openocd.debug.args={params.verbose} -l "{{build.path}/{build.project_name}_DebugOpenOCD.log}" -s"{path}/scripts/" -f "{path}/scripts/interface/{build.openocddebugger}" -f "{path}/scripts/{build.openocdscript}" -c "init"
tools.openocd.debug.address=localhost:3333
tools.bmp_upload.cmd=arm-none-eabi-gdb.exe
tools.bmp_upload.debug.args=-nh -b 115200 -ex "target extended-remote \\.\{serial.port}" -ex "monitor swdp_scan" -ex "attach 1"
tools.f2232h.server.build.openocddebugger=ftdi/minimodule-lowcost.cfg
tools.f2232h.cmd=arm-none-eabi-gdb.exe
tools.f2232h.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.f2232h.pattern="{path}/{cmd}"
tools.f2232h.server.tool=openocd
tools.f2232h.server.args={params.verbose} -l "{{build.path}/{build.project_name}_DebugOpenOCD.log}" -s"{path}/scripts/" -f "{path}/scripts/interface/{build.openocddebugger}" -c "transport select swd" -c "ftdi_layout_signal SWD_EN -data 0" -f "{path}/scripts/{build.openocdscript}"  -c "init"
tools.f2232mm.server.build.openocddebugger=ftdi/minimodule.cfg
tools.f2232mm.cmd=arm-none-eabi-gdb.exe
tools.f2232mm.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.f2232mm.pattern="{path}/{cmd}"
tools.f2232mm.server.tool=openocd
tools.f2232mm.server.args={params.verbose} -l "{{build.path}/{build.project_name}_DebugOpenOCD.log}" -s"{path}/scripts/" -f "{path}/scripts/interface/{build.openocddebugger}" -c "transport select swd" -c "ftdi_layout_signal SWD_EN -data 0" -f "{path}/scripts/{build.openocdscript}"  -c "init"
tools.jlink.server.build.openocddebugger=jlink.cfg
tools.jlink.cmd=arm-none-eabi-gdb.exe
tools.jlink.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.jlink.pattern="{path}/{cmd}"
tools.jlink.server.tool=openocd
tools.jlink.server.args={params.verbose} -l "{{build.path}/{build.project_name}_DebugOpenOCD.log}" -s "{path}/scripts/" -f "{path}/scripts/interface/{build.openocddebugger}" -c "transport select swd" -f "{path}/scripts/{build.openocdscript}"  -c "init"
tools.stlinkv21.server.build.openocddebugger=stlink-v2-1.cfg
tools.stlinkv21.cmd=arm-none-eabi-gdb.exe
tools.stlinkv21.args=
tools.stlinkv21.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.stlinkv21.pattern="{path}/{cmd}" {args}
tools.stlinkv21.server.tool=openocd
tools.stlinkv2.server.build.openocddebugger=stlink-v2.cfg
tools.stlinkv2.cmd=arm-none-eabi-gdb.exe
tools.stlinkv2.path={runtime.tools.arm-none-eabi-gcc.path}/bin
tools.stlinkv2.pattern="{path}/{cmd}"
tools.stlinkv2.server.tool=openocd
debug_menu.hwdebugger.bmp=Black Magic (External)
debug_menu.hwdebugger.bmp.debug.tool=bmp_upload
meta_bmp.sentence=This debugger requires the 20-pin ribbon cable to link to your target, see connections below
meta_bmp.comment=Ensure the COM Port for the Black Magic is selected before attaching the Debugger. Set vMicro > Debugger > 'Compiler Optimization' to 'No Project', 'No Project + Libraries' or 'None' when debugging. (NOTE: Changing the optimization setting for this platform might cause compilation errors with certain code such as HardwareSerial.)
meta_bmp.image.connect=https://www.visualmicro.com/pics/Debug-Help-STM32-BMP-Connections.png
meta_bmp.image.operation=https://www.visualmicro.com/pics/Debug-Break-STM32-BMP-VSOnly.png
meta_bmp.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.f2232h=F2232H Dual RS232
debug_menu.hwdebugger.f2232h.debug.tool=f2232h
meta_f2232h.sentence=This debugger will require some wiring to connect it to your target STM32 board
meta_f2232h.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to 'No Project', 'No Project + Libraries' or 'None' when debugging. (NOTE: Changing the optimization setting for this platform might cause compilation errors with certain code such as HardwareSerial.)
meta_f2232h.image.connect=https://www.visualmicro.com/pics/Debug-Break-STM32-FT2232H-Connections.png
meta_f2232h.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.f2232mm=F2232 MiniModule
debug_menu.hwdebugger.f2232mm.debug.tool=f2232mm
meta_f2232mm.sentence=This debugger will require some wiring to allow it to function, and connect to your target STM32 board
meta_f2232mm.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to 'No Project', 'No Project + Libraries' or 'None' when debugging. (NOTE: Changing the optimization setting for this platform might cause compilation errors with certain code such as HardwareSerial.)
meta_f2232mm.image.connect=https://www.visualmicro.com/pics/Debug-Help-STM32-FT2232MM-Connections.png
meta_f2232mm.image.operation=https://www.visualmicro.com/pics/Debug-Help-STM32-FT2232MM-VSOnly.png
meta_f2232mm.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.jlink=Segger J-Link
debug_menu.hwdebugger.jlink.debug.tool=jlink
meta_jlink.sentence=This debugger will require some wiring to connect it to your target STM32 board
meta_jlink.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to 'No Project', 'No Project + Libraries' or 'None' when debugging. (NOTE: Changing the optimization setting for this platform might cause compilation errors with certain code such as HardwareSerial.)
meta_jlink.image.connect=https://www.visualmicro.com/pics/Debug-Help-STM32-Jlink-Connections.png
meta_jlink.image.operation=https://www.visualmicro.com/pics/Debug-Help-STM32-STM32-Jlink-VSOnly.png
meta_jlink.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.stlinkv21=STLink v2.1 (Onboard)
debug_menu.hwdebugger.stlinkv21.debug.tool=stlinkv21
meta_stlinkv21.sentence=This debugger is built onto the board, and requires both jumpers to be present on the STLINK/Board header
meta_stlinkv21.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to 'No Project', 'No Project + Libraries' or 'None' when debugging. (NOTE: Changing the optimization setting for this platform might cause compilation errors with certain code such as HardwareSerial.)
meta_stlinkv21.image.connect=https://www.visualmicro.com/pics/Debug-Help-STM32-STlinkBuiltIn-Connections.png
meta_stlinkv21.image.operation=https://www.visualmicro.com/pics/Debug-Break-STM32-STlinkBuiltIn-VSOnly.png
meta_stlinkv21.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.stlinkv2=STLink v2 (External)
debug_menu.hwdebugger.stlinkv2.debug.tool=stlinkv2
meta_stlinkv2.sentence=This debugger requires the 20-pin ribbon cable to link to your target.
meta_stlinkv2.comment=Further info can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to 'No Project', 'No Project + Libraries' or 'None' when debugging. (NOTE: Changing the optimization setting for this platform might cause compilation errors with certain code such as HardwareSerial.)
meta_stlinkv2.image.connect=https://www.visualmicro.com/pics/Debug-Help-STM32-STlink-Connections.png
meta_stlinkv2.image.operation=https://www.visualmicro.com/pics/Debug-Break-STM32-STlink-VSOnly.png
meta_stlinkv2.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
tools.openocd.upload.elf.message=****[vMicro]**** Uploading ELF :
tools.openocd.upload.path={runtime.tools.openocd-0.10.0.1.path}
tools.openocd.upload.cmd=bin/openocd.exe
tools.openocd.upload.cmd.windows=bin/openocd.exe
tools.openocd.upload.params.verbose=-d2
tools.openocd.upload.params.quiet=-d0
tools.openocd.upload.pattern="{upload.path}/{upload.cmd}" {upload.verbose} -s "{upload.path}/share/openocd/scripts/" -f "interface/{upload.openocddebugger}" -f "{upload.openocdscript}" -c "echo -n {{upload.elf.message}}" -c "reset_config; telnet_port disabled; program {{{build.path}/{build.project_name}.elf}} reset;reset_config;shutdown"
tools.openocd.upload.extra_params=
tools.openocd.upload.protocol=
tools.openocd.protocol=
tools.openocd.upload.openocdscript=target/target/stm32f4x.cfg
tools.jlinkocd.upload.elf.message=****[vMicro]**** Uploading ELF :
tools.jlinkocd.upload.path={runtime.tools.openocd-0.10.0.1.path}
tools.jlinkocd.upload.cmd=bin/openocd.exe
tools.jlinkocd.upload.cmd.windows=bin/openocd.exe
tools.jlinkocd.upload.params.verbose=-d2
tools.jlinkocd.upload.params.quiet=-d0
tools.jlinkocd.upload.pattern="{upload.path}/{upload.cmd}" {upload.verbose} -s "{upload.path}/share/openocd/scripts/" -f "interface/{upload.openocddebugger}" -c "transport select swd" -f "{upload.openocdscript}" -c "echo -n {{upload.elf.message}}" -c "reset_config; telnet_port disabled; program {{{build.path}/{build.project_name}.elf}} reset;reset_config;shutdown"
tools.jlinkocd.upload.extra_params=
tools.jlinkocd.upload.protocol=
tools.jlinkocd.protocol=
tools.jlinkocd.upload.openocdscript=target/stm32f1x.cfg
tools.ftdiocd.upload.elf.message=****[vMicro]**** Uploading ELF :
tools.ftdiocd.upload.path={runtime.tools.openocd-0.10.0.1.path}
tools.ftdiocd.upload.cmd=bin/openocd.exe
tools.ftdiocd.upload.cmd.windows=bin/openocd.exe
tools.ftdiocd.upload.params.verbose=-d2
tools.ftdiocd.upload.params.quiet=-d0
tools.ftdiocd.upload.pattern="{upload.path}/{upload.cmd}" {upload.verbose} -s "{upload.path}/share/openocd/scripts/" -f "interface/{upload.openocddebugger}"  -c "transport select swd" -c "ftdi_layout_signal SWD_EN -data 0" -f "{upload.openocdscript}" -c "echo -n {{upload.elf.message}}" -c "reset_config; telnet_port disabled; program {{{build.path}/{build.project_name}.elf}} reset;reset_config;shutdown"
tools.ftdiocd.upload.extra_params=
tools.ftdiocd.upload.protocol=
tools.ftdiocd.protocol=
tools.ftdiocd.upload.openocdscript=target/stm32f1x.cfg
tools.vmbmp.upload.cmd=bin/arm-none-eabi-gdb.exe
tools.vmbmp.upload.cmd.windows=bin/arm-none-eabi-gdb.exe
tools.vmbmp.upload.path={runtime.tools.arm-none-eabi-gcc.path}
tools.vmbmp.upload.pattern={upload.path}/{upload.cmd} -nx -b 230400 -batch -ex "set confirm off" -ex "target extended-remote \\.\{serial.port}" -ex "monitor swdp_scan" -ex "attach 1" -ex "load" -ex "compare-sections" -ex "kill" "{build.path}/{build.project_name}.elf" -ex "kill"
version=1.0.0
compiler.stm.extra_include="-I{build.source.path}" "-I{build.core.path}/avr" "-I{build.core.path}/stm32" "-I{build.core.path}/stm32/LL" "-I{build.core.path}/stm32/usb" "-I{build.core.path}/stm32/usb/hid" "-I{build.core.path}/stm32/usb/cdc" "-I{build.system.path}/Drivers/{build.series}_HAL_Driver/Inc" "-I{build.system.path}/Drivers/{build.series}_HAL_Driver/Src" "-I{build.system.path}/{build.series}" "-I{build.system.path}/Middlewares/ST/STM32_USB_Device_Library/Core/Inc" "-I{build.system.path}/Middlewares/ST/STM32_USB_Device_Library/Core/Src"
compiler.warning_flags=-w
compiler.warning_flags.none=-w
compiler.warning_flags.default=
compiler.warning_flags.more=-Wall
compiler.warning_flags.all=-Wall -Wextra
compiler.path={runtime.tools.xpack-arm-none-eabi-gcc-9.2.1-1.1.path}/bin/
compiler.S.cmd=arm-none-eabi-gcc
compiler.c.cmd=arm-none-eabi-gcc
compiler.cpp.cmd=arm-none-eabi-g++
compiler.ar.cmd=arm-none-eabi-gcc-ar
compiler.c.elf.cmd=arm-none-eabi-gcc
compiler.objcopy.cmd=arm-none-eabi-objcopy
compiler.elf2hex.cmd=arm-none-eabi-objcopy
compiler.libraries.ldflags=
compiler.extra_flags=-mcpu={build.mcu} {build.flags.fp} -mthumb "@{build.opt.path}"
compiler.S.flags={compiler.extra_flags} -c -x assembler-with-cpp {compiler.stm.extra_include}
compiler.c.flags={compiler.extra_flags} -c {build.flags.optimize} {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD {compiler.stm.extra_include}
compiler.cpp.flags={compiler.extra_flags} -c {build.flags.optimize} {compiler.warning_flags} -std={compiler.cpp.std} -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -MMD {compiler.stm.extra_include}
compiler.ar.flags=rcs
compiler.c.elf.flags=-mcpu={build.mcu} {build.flags.fp} -mthumb {build.flags.optimize} {build.flags.ldspecs} -Wl,--defsym=LD_FLASH_OFFSET={build.flash_offset} -Wl,--defsym=LD_MAX_SIZE={upload.maximum_size} -Wl,--defsym=LD_MAX_DATA_SIZE={upload.maximum_data_size} -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
compiler.elf2bin.flags=-O binary
compiler.elf2hex.flags=-O ihex
compiler.ldflags=
compiler.size.cmd=arm-none-eabi-size
compiler.define=-DARDUINO=
build.bootloader_flags=
build.ldscript=ldscript.ld
compiler.c.extra_flags=
compiler.c.elf.extra_flags=
compiler.cpp.extra_flags=
compiler.cpp.std=gnu++14
compiler.S.extra_flags={build.startup_file}
compiler.ar.extra_flags=
compiler.elf2bin.extra_flags=
compiler.elf2hex.extra_flags=
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.5.1.path}/CMSIS/Core/Include/" "-I{build.system.path}/Drivers/CMSIS/Device/ST/{build.series}/Include/" "-I{build.system.path}/Drivers/CMSIS/Device/ST/{build.series}/Source/Templates/gcc/" "-I{runtime.tools.CMSIS-5.5.1.path}/CMSIS/DSP/Include"
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.5.1.path}/CMSIS/DSP/Lib/GCC/" -l{build.cmsis_lib_gcc}
build.usb_flags=-DUSBCON {build.usb_speed} -DUSBD_VID={build.vid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT="{build.board}"' -DHAL_PCD_MODULE_ENABLED
build.usb_manufacturer="Unknown"
build.info.flags=-D{build.series} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} -DBOARD_NAME="{build.board}"
build.xSerial=-DHAL_UART_MODULE_ENABLED
build.enable_usb=
build.usb_speed=
build.startup_file=
build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
build.flags.optimize=-Os
build.flags.ldspecs=--specs=nano.specs
build.flash_offset=0
build.opt.name=build_opt.h
build.opt.sourcepath={build.source.path}/{build.opt.name}
build.opt.path={build.path}/{build.opt.name}
build.src_wrapper.path={build.path}/SrcWrapper.cpp
recipe.hooks.prebuild.1.pattern.windows=cmd /c if not exist "{build.path}" mkdir "{build.path}"
recipe.hooks.prebuild.1.pattern.linux=bash -c "[ -f {build.path} ] || mkdir -p {build.path}"
recipe.hooks.prebuild.1.pattern.macosx=bash -c "[ -f {build.path} ] || mkdir -p {build.path}"
recipe.hooks.prebuild.2.pattern.windows=cmd /c if not exist "{build.opt.sourcepath}" type NUL > "{build.opt.path}"
recipe.hooks.prebuild.2.pattern.linux=bash -c "[ -f {build.opt.sourcepath} ] || touch {build.opt.path}"
recipe.hooks.prebuild.2.pattern.macosx=bash -c "[ -f {build.opt.sourcepath} ] || touch {build.opt.path}"
recipe.hooks.prebuild.3.pattern.windows=cmd /c echo #include ^<SrcWrapper.h^> > "{build.src_wrapper.path}"
recipe.hooks.prebuild.3.pattern.linux=bash -c "echo $0 > {build.src_wrapper.path}" "#include <SrcWrapper.h>"
recipe.hooks.prebuild.3.pattern.macosx=bash -c "echo $0 > {build.src_wrapper.path}" "#include <SrcWrapper.h>"
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} {build.info.flags} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} {build.info.flags} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} {build.info.flags} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" {compiler.c.elf.flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" {compiler.c.elf.extra_flags} {compiler.ldflags} {compiler.arm.cmsis.ldflags} -o "{build.path}/{build.project_name}.elf" "-L{build.path}" -Wl,--start-group {object_files} {compiler.libraries.ldflags} "{archive_file_path}" -lc -Wl,--end-group -lm -lgcc -lstdc++
recipe.objcopy.bin.pattern="{compiler.path}{compiler.objcopy.cmd}" {compiler.elf2bin.flags} {compiler.elf2bin.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
recipe.output.tmp_file={build.project_name}.hex
recipe.output.save_file={build.project_name}.{build.variant}.hex
recipe.objcopy.hex.pattern="{compiler.path}{compiler.objcopy.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
recipe.size.regex=^(?:\.text|\.data|\.rodata)\s+([0-9]+).*
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
recipe.size.regex.eeprom=^(?:\.eeprom)\s+([0-9]+).*
tools.massStorageCopy.cmd=massStorageCopy.bat
tools.massStorageCopy.cmd.windows=massStorageCopy.bat
tools.massStorageCopy.cmd.macosx=massStorageCopyMacOsX
tools.massStorageCopy.path={runtime.tools.STM32Tools.path}/tools/win
tools.massStorageCopy.path.macosx={runtime.tools.STM32Tools.path}/tools/macosx
tools.massStorageCopy.path.linux={runtime.tools.STM32Tools.path}/tools/linux
tools.massStorageCopy.upload.params.verbose=
tools.massStorageCopy.upload.params.quiet=
tools.massStorageCopy.upload.pattern="{path}/{cmd}" {upload.verbose} -I "{build.path}/{build.project_name}.bin" -O "{node}"
tools.stm32CubeProg.cmd=stm32CubeProg.bat
tools.stm32CubeProg.cmd.macosx=stm32CubeProg
tools.stm32CubeProg.cmd.windows=stm32CubeProg.bat
tools.stm32CubeProg.path.linux={runtime.tools.STM32Tools.path}/tools/linux
tools.stm32CubeProg.path.macosx={runtime.tools.STM32Tools.path}/tools/macosx
tools.stm32CubeProg.path.windows={runtime.tools.STM32Tools.path}/tools/win
tools.stm32CubeProg.upload.params.verbose=
tools.stm32CubeProg.upload.params.quiet=
tools.stm32CubeProg.upload.pattern="{path}/{cmd}" {upload.protocol} "{build.path}/{build.project_name}.bin" {upload.options}
tools.bmp_upload.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
tools.bmp_upload.upload.speed=230400
tools.bmp_upload.upload.params.verbose=-batch
tools.bmp_upload.upload.params.quiet=--batch-silent
tools.bmp_upload.upload.pattern="{path}{cmd}" -nx -b {upload.speed} {upload.verbose} -ex "set confirm off" -ex "target extended-remote {serial.port}" -ex "monitor swdp_scan" -ex "attach 1" -ex "load" -ex "compare-sections" -ex "kill" "{build.path}/{build.project_name}.elf"
tools.hid_upload.cmd=hid-flash.exe
tools.hid_upload.cmd.windows=hid-flash.exe
tools.hid_upload.path={runtime.tools.STM32Tools.path}/tools/win
tools.hid_upload.path.macosx={runtime.tools.STM32Tools.path}/tools/macosx
tools.hid_upload.path.linux={runtime.tools.STM32Tools.path}/tools/linux
tools.hid_upload.upload.params.verbose=-d
tools.hid_upload.upload.params.quiet=n
tools.hid_upload.upload.pattern="{path}/{cmd}" "{build.path}/{build.project_name}.bin" {serial.port.file}
tools.maple_upload.cmd=maple_upload.bat
tools.maple_upload.cmd.windows=maple_upload.bat
tools.maple_upload.path={runtime.tools.STM32Tools.path}/tools/win
tools.maple_upload.path.macosx={runtime.tools.STM32Tools.path}/tools/macosx
tools.maple_upload.path.linux={runtime.tools.STM32Tools.path}/tools/linux
tools.maple_upload.upload.params.verbose=-d
tools.maple_upload.upload.params.quiet=n
tools.maple_upload.upload.pattern="{path}/{cmd}" {serial.port.file} {upload.altID} {upload.usbID} "{build.path}/{build.project_name}.bin"
tools.remoteproc_gen.path={runtime.tools.STM32Tools.path}/tools
tools.remoteproc_gen.busybox={path}/win/busybox.exe
tools.remoteproc_gen.busybox.windows={path}/win/busybox.exe
tools.remoteproc_gen.script=run_arduino_gen.sh
tools.remoteproc_gen.upload.params.verbose=
tools.remoteproc_gen.upload.params.quiet=
tools.remoteproc_gen.upload.pattern="{busybox}" sh "{path}/{script}" generate "{build.path}/{build.project_name}.elf" "{build.path}/run_arduino_{build.project_name}.sh"
recipe.hooks.prebuild.1.pattern=cmd /c if not exist "{build.path}" mkdir "{build.path}"
recipe.hooks.prebuild.2.pattern=cmd /c if not exist "{build.opt.sourcepath}" type NUL > "{build.opt.path}"
recipe.hooks.prebuild.3.pattern=cmd /c echo #include ^<SrcWrapper.h^> > "{build.src_wrapper.path}"
tools.stm32CubeProg.path={runtime.tools.STM32Tools.path}/tools/win
vm.platform.root.path=c:\program files (x86)\microsoft visual studio\2017\professional\common7\ide\extensions\p1hbfuhp.cmm\Micro Platforms\arduino16x
runtime.tools.xpack-arm-none-eabi-gcc.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\xpack-arm-none-eabi-gcc\9.2.1-1.1
runtime.tools.xpack-arm-none-eabi-gcc-9.2.1-1.1.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\xpack-arm-none-eabi-gcc\9.2.1-1.1
runtime.tools.STM32Tools.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\STM32Tools\1.3.2
runtime.tools.STM32Tools-1.3.2.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\STM32Tools\1.3.2
runtime.tools.CMSIS.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\CMSIS\5.5.1
runtime.tools.CMSIS-5.5.1.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\CMSIS\5.5.1
runtime.tools.arduinoOTA.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arduinoOTA\1.2.0
runtime.tools.arduinoOTA-1.2.0.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arduinoOTA\1.2.0
runtime.tools.arduinoOTA-1.2.1.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arduinoOTA\1.2.1
runtime.tools.arduinoSTM32load.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arduinoSTM32load\2.0.0
runtime.tools.arduinoSTM32load-2.0.0.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arduinoSTM32load\2.0.0
runtime.tools.arm-none-eabi-gcc.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arm-none-eabi-gcc\7-2017q4
runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1
runtime.tools.arm-none-eabi-gcc-7-2017q4.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\arm-none-eabi-gcc\7-2017q4
runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr
runtime.tools.avrdude-6.3.0-arduino14.path=C:\Program Files (x86)\Arduino\hardware\tools\avr
runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr
runtime.tools.avr-gcc-5.4.0-atmel3.6.1-arduino2.path=C:\Program Files (x86)\Arduino\hardware\tools\avr
runtime.tools.bossac.path=C:\Users\sscholl\AppData\Local\arduino15\packages\adafruit\tools\bossac\1.8.0-48-gb176eee
runtime.tools.bossac-1.6.1-arduino.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\bossac\1.6.1-arduino
runtime.tools.bossac-1.7.0.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\bossac\1.7.0
runtime.tools.bossac-1.7.0-arduino3.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\bossac\1.7.0-arduino3
runtime.tools.bossac-1.8.0-48-gb176eee.path=C:\Users\sscholl\AppData\Local\arduino15\packages\adafruit\tools\bossac\1.8.0-48-gb176eee
runtime.tools.CMSIS-4.5.0.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\CMSIS\4.5.0
runtime.tools.CMSIS-Atmel.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\CMSIS-Atmel\1.2.0
runtime.tools.CMSIS-Atmel-1.1.0.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\CMSIS-Atmel\1.1.0
runtime.tools.CMSIS-Atmel-1.2.0.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\CMSIS-Atmel\1.2.0
runtime.tools.dfu-util.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\dfu-util\0.9.0-arduino1
runtime.tools.dfu-util-0.9.0-arduino1.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\dfu-util\0.9.0-arduino1
runtime.tools.openocd.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\openocd\0.10.0-arduino7
runtime.tools.openocd-0.10.0-arduino7.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\openocd\0.10.0-arduino7
runtime.tools.openocd-0.9.0-arduino.path=C:\Users\sscholl\AppData\Local\arduino15\packages\adafruit\tools\openocd\0.9.0-arduino
runtime.tools.openocd-0.9.0-arduino6-static.path=C:\Users\sscholl\AppData\Local\arduino15\packages\arduino\tools\openocd\0.9.0-arduino6-static
runtime.tools.tools-avr.path=C:\Program Files (x86)\Arduino\hardware\tools\avr
runtime.vm.boardinfo.id=STM32_Nucleo_144
runtime.vm.boardinfo.name=STM32_Nucleo_144
runtime.vm.boardinfo.desc=Nucleo-144
runtime.vm.boardinfo.src_location=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0
ide.hint=Use installed IDE. Provides built-in hardware, reference/help and libraries.
ide.location.key=Arduino16x
ide.location.ide.winreg=Arduino 1.6.x Application
ide.location.sketchbook.winreg=Arduino 1.6.x Sketchbook
ide.location.sketchbook.preferences=sketchbook.path
ide.default.revision_name=1.9.0
ide.default.version=10800
ide.default.package=arduino
ide.default.platform=avr
ide.multiplatform=true
ide.includes=Arduino.h
ide.exe_name=arduino
ide.recipe.preproc.defines.flags=-w -x c++ -E -dM
ide.platformswithoutpackage=false
ide.includes.fallback=wprogram.h
ide.extension=ino
ide.extension.fallback=pde
ide.versionGTEQ=160
ide.exe=arduino.exe
ide.builder.exe=arduinobuilder.exe
ide.builder.name=Arduino Builder
ide.hosts=atmel
ide.url=https://www.visualmicro.com/page/Download-Arduino-Or-Other-Supporting-IDEs.aspx
ide.help.reference.path=reference
ide.help.reference.path2=reference\www.arduino.cc\en\Reference
ide.help.reference.serial=reference\www.arduino.cc\en\Serial
ide.location.preferences.portable={runtime.ide.path}\portable
ide.location.preferences.arduinoData={runtime.sketchbook.path}\ArduinoData
ide.location.preferences=%VM_APPDATA_LOCAL%\arduino15\preferences.txt
ide.location.preferences_fallback=%VM_APPDATA_ROAMING%\arduino15\preferences.txt
ide.location.contributions=%VM_APPDATA_LOCAL%\arduino15
ide.location.contributions_fallback=%VM_APPDATA_ROAMING%\arduino15
ide.contributions.boards.allow=true
ide.contributions.boards.ignore_unless_rewrite_found=true
ide.contributions.libraries.allow=true
ide.contributions.boards.support.urls.wiki=https://github.com/arduino/Arduino/wiki/Unofficial-list-of-3rd-party-boards-support-urls
ide.create_platforms_from_boardsTXT.teensy=build.core
vm.debug=true
software=ARDUINO
ssh.user.name=root
ssh.user.default.password=arduino
ssh.host.wwwfiles.path=/www/sd
build.working_directory={runtime.ide.path}\java\bin
ide.debug_menu.debugger_type=Debug
ide.debug_menu.debugger_type.none=Off
ide.debug_menu.none.debug.tool=no_debug
ide.debug_menu.debugger_type.universal=Serial
ide.debug_menu.universal.debug.tool=auto
ide.debug_menu.debugger_type.hwdebugger=Hardware
ide.debug_menu.hwdebugger=Debugger
ide.debug_menu.hwdebugger.custom_debugger=Manual/Custom
ide.debug_menu.hwdebugger.custom_debugger.debug.tool=dbg_external
ide.meta_custom_debugger.sentence=Provides a build that includes debug defines and will launch a custom debugger if one is provided.
ide.meta_custom_debugger.paragraph=This is option is for advanced use. It is recommended that a pre-configured debugger be selected when available in this list. Usage: Optionally add a customer debugger to the project. A 'debugger_launch.json' file shares the same command syntax that is used by the VsCode debugger. Custom debuggers can be targeted at a board and/or variant and/or configuration name. IE: [variant].[configuration_name][.]debugger_launch.json
ide.meta_custom_debugger.reference.usage.url=https://github.com/Microsoft/vscode-cpptools/blob/master/launch.md#customlaunchsetupcommands
ide.meta_custom_debugger.reference.connect.url=https://docs.microsoft.com/en-us/visualstudio/debugger/create-custom-views-of-native-objects?view=vs-2019
ide.compiler_flags_no_opt=-O0
ide.debug_menu.vm_disable_optimization=Disable Optimization
ide.debug_menu.vm_disable_optimization.vm_disable_opt_default=Default Optimization
ide.debug_menu.vm_disable_optimization.vm_disable_opt_proj=No Project  Optimization
ide.debug_menu.vm_disable_opt_proj.vm_disable_opt_project={ide.compiler_flags_no_opt}
ide.debug_menu.vm_disable_optimization.vm_disable_opt_proj_libs=No Project + Libraries Optimization
ide.debug_menu.vm_disable_opt_proj_libs.vm_disable_opt_project={ide.compiler_flags_no_opt}
ide.debug_menu.vm_disable_opt_proj_libs.vm_disable_opt_libraries={ide.compiler_flags_no_opt}
ide.debug_menu.vm_disable_optimization.vm_disable_opt_all=No Optimization
ide.meta_vm_disable_opt_all.sentence=Disable compiler optimization for all sources:- Project, Library and Platform.
ide.meta_vm_disable_opt_all.comment=After switching between 'No Optimization' and other optimization values, please click "Solution Clean" or switch off (or cycle) 'vMicro>Compiler>Shared Cache For Cores'. NOTE: Changing optimization settings can cause build errors or result in overly large programs.
ide.debug_menu.vm_disable_opt_all.vm_disable_opt_project={ide.compiler_flags_no_opt}
ide.debug_menu.vm_disable_opt_all.vm_disable_opt_libraries={ide.compiler_flags_no_opt}
ide.debug_menu.vm_disable_opt_all.vm_disable_opt_core={ide.compiler_flags_no_opt}
ide.appid=arduino16x
location.sketchbook=C:\Users\sscholl\Documents\Arduino
build.core.vmresolved=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino
build.core.parentfolder.vmresolved=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\cores
build.core.coresparentfolder.vmresolved=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0
build.core.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino
vm.core.include=arduino.h
vm.boardsource.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0
runtime.platform.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0
vm.platformname.name=stm32
build.arch=STM32
custom_debugger=Manual/Custom
custom_debugger.debug.tool=dbg_external
bmp=Black Magic (External)
bmp.debug.tool=bmp_upload
f2232h=F2232H Dual RS232
f2232h.debug.tool=f2232h
f2232mm=F2232 MiniModule
f2232mm.debug.tool=f2232mm
jlink=Segger J-Link
jlink.debug.tool=jlink
stlinkv21=STLink v2.1 (Onboard)
stlinkv21.debug.tool=stlinkv21
stlinkv2=STLink v2 (External)
stlinkv2.debug.tool=stlinkv2
debug.tool=stlinkv21
node=NODE_F429ZI
upload.maximum_size=2097152
upload.maximum_data_size=262144
build.mcu=cortex-m4
build.series=STM32F4xx
build.product_line=STM32F429xx
build.variant=NUCLEO_F429ZI
build.cmsis_lib_gcc=arm_cortexM4lf_math
upload.protocol=
upload.tool=openocd
build.project_name=SimpleNeoPixel01.ino
build.project_path=C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01
sketch_path=C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01
ProjectDir=C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01\
build.path=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug
builder.noino=false
intellisense.include.paths={runtime.hardware.path}
build.variant.vmresolved.name=NUCLEO_F429ZI
build.variant.vmresolved.full_path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\variants\NUCLEO_F429ZI
build.architecture=9.2.1-1.1
vmresolved.compiler.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\xpack-arm-none-eabi-gcc\9.2.1-1.1\bin\
vmresolved.tools.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\tools\xpack-arm-none-eabi-gcc\9.2.1-1.1
vm.runtime.compiler.cached_cores_path=C:\Users\sscholl\AppData\Local\Temp\1\VMBCore\arduino16x
vm.runtime.compiler.showwarnings=false
vm.runtime.compiler.showwarnings_core=false
vm.runtime.compiler.showwarnings_library=false
vm.runtime.upload.verbose=false
vm.runtime.upload.verify=true
runtime.vm.ide.platforms.path=c:\program files (x86)\microsoft visual studio\2017\professional\common7\ide\extensions\p1hbfuhp.cmm\Micro Platforms
runtime.vm.ide.tools.openocd.path={runtime.tools.openocd-0.9.0.path}
runtime.vm.openocd.path={runtime.tools.openocd-0.9.0.path}
vm.runtime.build.intermediate_output_path=C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01\Debug\
vm.runtime.build.final_output_path=C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01\Debug\
compiler.always_include_sketchfolder=true
compiler.always_include_sharedprojectfolders=true
vm.runtime.compiler.auto_discover_includes=true
vm.runtime.compiler.allow_library_debugging=false
serial.port.file=COM29
serial.port=COM29
serial.port.num=29
extra.time.local=1580502683
extra.time.utc=1580531483
extra.time.dst=-28800
extra.time.zone=28800
serial.port.caption=COM29 - USB Serial Device
serial.Caption=USB Serial Device (COM29)
serial.ClassGuid={4d36e978-e325-11ce-bfc1-08002be10318}
serial.CompatibleID.value0=USB\Class_02
serial.ConfigManagerErrorCode=0
serial.ConfigManagerUserConfig=False
serial.CreationClassName=Win32_PnPEntity
serial.Description=USB Serial Device
serial.DeviceID=USB\VID_0483&PID_374B&MI_02\7&99D5A20&0&0002
serial.HardwareID.value0=USB\VID_0483&PID_374B&MI_02
serial.Manufacturer=Microsoft
serial.Name=USB Serial Device (COM29)
serial.PNPClass=Ports
serial.PNPDeviceID=USB\VID_0483&PID_374B&MI_02\7&99D5A20&0&0002
serial.Present=True
serial.Service=usbser
serial.Status=OK
serial.SystemCreationClassName=Win32_ComputerSystem
serial.SystemName=RWS2-SSCHOLL76
serial.vid=0x0483
serial.pid=0x374B
serial.vidpid=0483374B
serial.vid_pid=0x0483_0x374B
serial.iserial=7&99D5A20&0&0002
serial.port.iserial=7&99D5A20&0&0002
upload.openocddebugger=stlink-v2-1.cfg
vm.runtime.compile.skip_library_file_if_exists_in_project=false
vm.runtime.compiler.auto_discover_includes_cache=true
build.vm.build.vmdebug=0
build.vm.build.isgdb=0
build.vm.build.optimised=1
build.vm.extra_flags=   -g -DVM_DEBUG_GDB 
vm.last.buildpath=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug
vm.build.verbose_build_properties=false
vm.build.export_binary=false
build.source.path=C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01
PreProcessor.HeaderCount=1
PreProcessor.PrototypeCount=4
vm.last.preproc.file.0.file=SimpleNeoPixel01.ino
vm.last.preproc.file.0.offset=1
vm.last.preproc.file.0.length=1193
vm.last.preproc.file.0.linecount=66
vm.last.preproc.file.0.linestart=0
vm.last.preproc.file.0.lineend=66
vm.last.preproc.file.0.prefix_lines=0
vm.sketch_source_path=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug
vm.build_use_temp=1
build.variant.path=C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\variants\NUCLEO_F429ZI
archive_file=core.a
archive_file_path=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug\core.a
tools.arduino-preprocessor.path={runtime.tools.arduino-preprocessor.path}
tools.arduino-preprocessor.cmd.path={path}/arduino-preprocessor
tools.arduino-preprocessor.pattern="{cmd.path}" "{source_file}" "{codecomplete}" -- -std=gnu++11
tools.ctags.path={runtime.tools.ctags.path}
tools.ctags.cmd.path={path}/ctags
tools.ctags.pattern="{cmd.path}" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "{source_file}"
tools.avrdude.path={runtime.tools.avrdude.path}
preproc.macros.flags=-w -x c++ -E -CC
recipe.preproc.macros="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} {preproc.macros.flags} {build.info.flags} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{preprocessed_file_path}"
vm_all_includes= -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\variants\NUCLEO_F429ZI"  -I"C:\Users\sscholl\Documents\Arduino\libraries\Adafruit_NeoPixel"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\libraries\SrcWrapper\src" 
vm_all_and_proj_includes= -I"C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\variants\NUCLEO_F429ZI"  -I"C:\Users\sscholl\Documents\Arduino\libraries\Adafruit_NeoPixel"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\libraries\SrcWrapper\src" 
vm_core_includes= -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\variants\NUCLEO_F429ZI" 
includes= -I"C:\Users\sscholl\Documents\Arduino\sketches\SimpleNeoPixel01"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\cores\arduino"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\variants\NUCLEO_F429ZI"  -I"C:\Users\sscholl\Documents\Arduino\libraries\Adafruit_NeoPixel"  -I"C:\Users\sscholl\AppData\Local\arduino15\packages\STM32\hardware\stm32\1.8.0\libraries\SrcWrapper\src" 
build.path_sketch=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug
build.path_core=C:\Users\sscholl\AppData\Local\Temp\1\VMBCore\arduino16x\9af8f6355b195469e19786f097b64725\core
build.path_libraries=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug
object_file=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug\SimpleNeoPixel01.cpp.o
source_file=C:\Users\sscholl\AppData\Local\Temp\1\VMBuilds\SimpleNeoPixel01\STM32_Nucleo_144\Debug\SimpleNeoPixel01.cpp
build.path_core_cached_root=C:\Users\sscholl\AppData\Local\Temp\1\VMBCore\arduino16x\9af8f6355b195469e19786f097b64725
object_files= "SimpleNeoPixel01.cpp.o"  "Adafruit_NeoPixel\esp8266.c.o"  "Adafruit_NeoPixel\Adafruit_NeoPixel.cpp.o"  "SrcWrapper\syscalls.c.o"  "SrcWrapper\HAL\stm32yyxx_hal.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_adc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_adc_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_can.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_cec.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_comp.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_comp_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_cordic.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_cortex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_crc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_crc_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_cryp.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_cryp_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dac.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dac_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dcmi.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dcmi_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dfsdm.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dfsdm_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dma.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dma2d.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dma_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_dsi.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_eth.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_eth_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_exti.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_fdcan.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_firewall.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_flash.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_flash_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_flash_ramfunc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_fmac.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_fmpi2c.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_fmpi2c_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_gfxmmu.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_gpio.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_gpio_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_hash.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_hash_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_hcd.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_hrtim.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_hsem.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_i2c.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_i2c_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_i2s.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_i2s_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_ipcc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_irda.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_iwdg.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_jpeg.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_lcd.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_lptim.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_ltdc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_ltdc_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_mdios.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_mdma.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_mmc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_mmc_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_msp_template.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_nand.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_nor.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_opamp.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_opamp_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_ospi.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_pccard.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_pcd.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_pcd_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_pka.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_pwr.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_pwr_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_qspi.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_ramecc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_rcc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_rcc_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_rng.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_rtc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_rtc_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_sai.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_sai_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_sd.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_sdadc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_sdram.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_sd_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_smartcard.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_smartcard_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_smbus.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_spdifrx.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_spi.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_spi_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_sram.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_swpmi.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_tim.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_timebase_rtc_alarm_template.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_timebase_rtc_wakeup_template.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_timebase_tim_template.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_tim_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_tsc.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_uart.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_uart_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_usart.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_usart_ex.c.o"  "SrcWrapper\HAL\stm32yyxx_hal_wwdg.c.o"  "SrcWrapper\LL\stm32yyxx_ll_adc.c.o"  "SrcWrapper\LL\stm32yyxx_ll_bdma.c.o"  "SrcWrapper\LL\stm32yyxx_ll_comp.c.o"  "SrcWrapper\LL\stm32yyxx_ll_cordic.c.o"  "SrcWrapper\LL\stm32yyxx_ll_crc.c.o"  "SrcWrapper\LL\stm32yyxx_ll_crs.c.o"  "SrcWrapper\LL\stm32yyxx_ll_dac.c.o"  "SrcWrapper\LL\stm32yyxx_ll_delayblock.c.o"  "SrcWrapper\LL\stm32yyxx_ll_dma.c.o"  "SrcWrapper\LL\stm32yyxx_ll_dma2d.c.o"  "SrcWrapper\LL\stm32yyxx_ll_exti.c.o"  "SrcWrapper\LL\stm32yyxx_ll_fmac.c.o"  "SrcWrapper\LL\stm32yyxx_ll_fmc.c.o"  "SrcWrapper\LL\stm32yyxx_ll_fsmc.c.o"  "SrcWrapper\LL\stm32yyxx_ll_gpio.c.o"  "SrcWrapper\LL\stm32yyxx_ll_hrtim.c.o"  "SrcWrapper\LL\stm32yyxx_ll_i2c.c.o"  "SrcWrapper\LL\stm32yyxx_ll_lptim.c.o"  "SrcWrapper\LL\stm32yyxx_ll_lpuart.c.o"  "SrcWrapper\LL\stm32yyxx_ll_mdma.c.o"  "SrcWrapper\LL\stm32yyxx_ll_opamp.c.o"  "SrcWrapper\LL\stm32yyxx_ll_pka.c.o"  "SrcWrapper\LL\stm32yyxx_ll_pwr.c.o"  "SrcWrapper\LL\stm32yyxx_ll_rcc.c.o"  "SrcWrapper\LL\stm32yyxx_ll_rng.c.o"  "SrcWrapper\LL\stm32yyxx_ll_rtc.c.o"  "SrcWrapper\LL\stm32yyxx_ll_sdmmc.c.o"  "SrcWrapper\LL\stm32yyxx_ll_spi.c.o"  "SrcWrapper\LL\stm32yyxx_ll_swpmi.c.o"  "SrcWrapper\LL\stm32yyxx_ll_tim.c.o"  "SrcWrapper\LL\stm32yyxx_ll_ucpd.c.o"  "SrcWrapper\LL\stm32yyxx_ll_usart.c.o"  "SrcWrapper\LL\stm32yyxx_ll_usb.c.o"  "SrcWrapper\LL\stm32yyxx_ll_utils.c.o"  "SrcWrapper\stm32\bootloader.c.o"  "SrcWrapper\stm32\clock.c.o"  "SrcWrapper\stm32\core_callback.c.o"  "SrcWrapper\stm32\dwt.c.o"  "SrcWrapper\stm32\hw_config.c.o"  "SrcWrapper\stm32\lock_resource.c.o"  "SrcWrapper\stm32\low_power.c.o"  "SrcWrapper\stm32\pinmap.c.o"  "SrcWrapper\stm32\PortNames.c.o"  "SrcWrapper\stm32\rtc.c.o"  "SrcWrapper\stm32\stm32_def.c.o"  "SrcWrapper\stm32\stm32_eeprom.c.o"  "SrcWrapper\stm32\system_stm32yyxx.c.o"  "SrcWrapper\stm32\timer.c.o"  "SrcWrapper\stm32\uart.c.o"  "SrcWrapper\stm32\analog.cpp.o"  "SrcWrapper\stm32\interrupt.cpp.o"  "C:\Users\sscholl\AppData\Local\Temp\1\VMBCore\arduino16x\9af8f6355b195469e19786f097b64725\variant\PeripheralPins.c.o"  "C:\Users\sscholl\AppData\Local\Temp\1\VMBCore\arduino16x\9af8f6355b195469e19786f097b64725\variant\variant.cpp.o"