***** ribbon cable disconnected from Olimex

Microsoft Windows [Version 10.0.17134.885]
(c) 2018 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Users\roger>"C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1\bin/openocd.exe" -d2 -s "C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1/share/openocd/scripts/" -c "adapter_khz 1000" -c "echo {***** Manual OCD-CFG ****}" -c "interface ftdi" -c "ftdi_device_desc {Olimex OpenOCD JTAG ARM-USB-TINY-H}" -c "ftdi_vid_pid 0x15ba 0x002a" -c "ftdi_layout_init 0x0808 0x0a1b" -c "ftdi_layout_signal nSRST -oe 0x0200" -c "ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100" -c "ftdi_layout_signal LED -data 0x0800" -c "echo {***** BOARD CFG *****}" -c "set ESP32_RTOS none" -f "C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1/share/openocd/scripts/board/esp-wroom-32.cfg" -c "init" -c "echo {***** RUNNING ****}" -c "sleep 1" -c "shutdown"
Open On-Chip Debugger  v0.10.0-esp32-20190313 (2019-03-13-09:57)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
adapter speed: 1000 kHz
***** Manual OCD-CFG ****
***** BOARD CFG *****
none
adapter speed: 2000 kHz
Info : Configured 2 cores
esp32 interrupt mask on
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

C:\Users\roger>
C:\Users\roger>


***** ribbon cable connected to Olimex and ESP32 Dev Board connected to ribbon cable and powered up

C:\Users\roger>"C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1\bin/openocd.exe" -d2 -s "C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1/share/openocd/scripts/" -c "adapter_khz 1000" -c "echo {***** Manual OCD-CFG ****}" -c "interface ftdi" -c "ftdi_device_desc {Olimex OpenOCD JTAG ARM-USB-TINY-H}" -c "ftdi_vid_pid 0x15ba 0x002a" -c "ftdi_layout_init 0x0808 0x0a1b" -c "ftdi_layout_signal nSRST -oe 0x0200" -c "ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100" -c "ftdi_layout_signal LED -data 0x0800" -c "echo {***** BOARD CFG *****}" -c "set ESP32_RTOS none" -f "C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1/share/openocd/scripts/board/esp-wroom-32.cfg" -c "init" -c "echo {***** RUNNING ****}" -c "sleep 1" -c "shutdown"
Open On-Chip Debugger  v0.10.0-esp32-20190313 (2019-03-13-09:57)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
adapter speed: 1000 kHz
***** Manual OCD-CFG ****
***** BOARD CFG *****
none
adapter speed: 2000 kHz
Info : Configured 2 cores
esp32 interrupt mask on
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED

C:\Users\roger>