VS Arduino
Visual Micro >> Installation & Troubleshooting >> IntelliSense: command-line error: invalid macro definition: __ARM-NONE-EABI_MK20DX128__
https://www.visualmicro.com/forums/YaBB.pl?num=1380035789

Message started by Kevin R on Sep 24th, 2013 at 3:16pm

Title: IntelliSense: command-line error: invalid macro definition: __ARM-NONE-EABI_MK20DX128__
Post by Kevin R on Sep 24th, 2013 at 3:16pm
Hello,

I'm working with visual studio 2012, Arduino 1.0.5, Teensyduino 1.16, and visual micro 1309.11.

When I select the teensy 3.0 board I get the following error "IntelliSense: command-line error: invalid macro definition: __ARM-NONE-EABI_MK20DX128__"

I tried an example sketch. It compiles fine, but IntelliSense won't work. :(

Kevin

Title: Re: IntelliSense: command-line error: invalid macro definition: __ARM-NONE-EABI_MK20DX128__
Post by Visual Micro on Sep 24th, 2013 at 3:28pm
Hi,

Atmel studio only supports Atmel hardware so when using a 32 bit Teensy we normally tell the intellisense engine it is a mega 2560. This is one area that Visual Studio has more flexibility however we did not find that intellisense failed. Maybe it needs re-testing.

Can you confirm that if you switch to an Atmel board such as Teensy 2 or the Arduino Uno that intellisense works. This is simply to check that your install is working okay?

Thanks

Title: Re: IntelliSense: command-line error: invalid macro definition: __ARM-NONE-EABI_MK20DX128__
Post by Kevin R on Sep 24th, 2013 at 3:41pm
Hello,

Yes, if I switch to Teensy 2.0 intellisense works fine.  I'm using Visual Studio 2012 rc3, not not the Atmel studio version, if that makes any difference.

Thanks,
Kevin

Title: Re: IntelliSense: command-line error: invalid macro definition: __ARM-NONE-EABI_MK20DX128__
Post by Visual Micro on Sep 24th, 2013 at 3:53pm
Okay thanks, we will do some more Teensy testing over the next week or so. It sounds like the intellisense is broken for the 3.0 board

Title: Re: IntelliSense: command-line error: invalid macro definition: __ARM-NONE-EABI_MK20DX128__
Post by Visual Micro on Mar 22nd, 2015 at 10:07pm
Off-Topic replies have been moved to this Topic.

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.