VS Arduino | |
Visual Micro >> Project Guidance >> Model Railway Turntable
https://www.visualmicro.com/forums/YaBB.pl?num=1418736028 Message started by Geordie on Dec 16th, 2014 at 1:20pm |
Title: Model Railway Turntable Post by Geordie on Dec 16th, 2014 at 1:20pm
Hi
I'm a newbie to Arduino. Does anyone have experience of programming an Arduino Uno to control & operate a model railway turntable. Alternatively can anyone point me in the right direction for suitable code Regards Geordiekerryman |
Title: Re: Model Railway Turntable Post by Visual Micro on Dec 16th, 2014 at 1:27pm
Hi,
Without giving too much thought I think hooking up a stepper motor (or a servo that can continuously turn 360 degrees) would be first step. That's pretty easy to do with various Arduino libraries. There are a few videos on youtube if you search for: Model Railway Turntable Arduino One video looks interesting and it food for thought. A bit more complex that you might need initially. https://www.youtube.com/watch?v=cJudmksy8-k A few push buttons and a servo/stepper would give you a simpler turn table controller. As I said a servo instead of a stepper might be easier to hook up. The arduino servo library wiki is here http://arduino.cc/en/reference/servo |
VS Arduino » Powered by YaBB 2.6.12! YaBB Forum Software © 2000-2024. All Rights Reserved. |