VS Arduino | |
>> >> I cannot get intellisense to work
https://www.visualmicro.com/forums/YaBB.pl?num=1437933615 Message started by tailwheel on Jul 26th, 2015 at 6:00pm |
Title: I cannot get intellisense to work Post by tailwheel on Jul 26th, 2015 at 6:00pm
I'm seeing this in the status bar:
Visual Micro: *RefreshIntellisense - System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary. at System.Collections.Generic.Dictionary`2.get_Item(TKey key) at Visual.Micro.Visual.Studio.Arduino.AddInApp.RefreshIntellisenseOfSketch(Project... I've installed the latest RC of Visual Micro, installed update 5 for VS2013. I've checked the extensions for .ino and is configured as recomended. I'm using the 1.0.6 IDE. One other thing that I hope is not causing this is that I installed VS2015. Intellisense was working in VS2013 but I don't know exactly when it stopped working so can't say if VS2015 installation is causing the problem. Thanks! |
Title: Re: I cannot get intellisense to work Post by Visual Micro on Jul 26th, 2015 at 9:46pm
Thanks that's a bug that will be fixed over the next 24/48
Forgot to test 1.0.x in the last releases! |
Title: Re: I cannot get intellisense to work Post by Visual Micro on Jul 27th, 2015 at 11:21am
The beta/rc on the download page contains a fix for intellisense and arduino 1.0.x versions
Thanks |
Title: Re: I cannot get intellisense to work Post by tailwheel on Jul 28th, 2015 at 2:48am
Works great.
Thank you! Admin note: August 2015 Intellisense not working is fixed by switching to a different board and back again or If you are using the older Arduino 1.6.0 or 1.6.1 Ide's then configure the Arduino 1.5 option in Visual Micro |
VS Arduino » Powered by YaBB 2.6.12! YaBB Forum Software © 2000-2024. All Rights Reserved. |