Visual Studio Ide for Arduino
https://www.visualmicro.com/forums/YaBB.pl
Other >> Other Hardware >> Visual Micro with rad1o
https://www.visualmicro.com/forums/YaBB.pl?num=1444150411

Message started by Tapio Haapala on Oct 6th, 2015 at 5:53pm

Title: Visual Micro with rad1o
Post by Tapio Haapala on Oct 6th, 2015 at 5:53pm
has anyone tested Visual Micro with rad1o board? https://github.com/rad1o/f1rmware.

It is cortex-m4 based board and I start thinking that what it needs to get support for it?

Title: Re: Visual Micro with rad1o
Post by Visual Micro on Oct 6th, 2015 at 9:55pm
Hi,

Your link doesn't work.

If the hardware works in arduino ide it should work in visual micro.

Did you try it?

Title: Re: Visual Micro with rad1o
Post by gelius59 on Oct 7th, 2015 at 6:12am
Hello.
At the end of the link, the extra slash.
Without it, the link works. :)
Rather Tim, rights, this does not apply to the Arduino.
Or am I wrong.

Title: Re: Visual Micro with rad1o
Post by Visual Micro on Oct 7th, 2015 at 11:44am
Thanks, no it doesn't look arduino compatible

Visual Studio Ide for Arduino » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2019. All Rights Reserved.