VS Arduino
>> >> ATTINY in visual micro
https://www.visualmicro.com/forums/YaBB.pl?num=1449742371

Message started by Trek19 on Dec 10th, 2015 at 10:12am

Title: ATTINY in visual micro
Post by Trek19 on Dec 10th, 2015 at 10:12am
I am just restarting my development using visual micro having upgraded my computer and Visual studio and wondered if there is a new way of adding support for ATTINY boards. I used to copy files into the boards folder which was all a bit messy.

Title: Re: ATTINY in visual micro
Post by Trek19 on Dec 10th, 2015 at 5:35pm
OK I just found the answer to my question at:
http://playground.arduino.cc/Main/ArduinoOnOtherAtmelChips
with details of how to do it here:
https://github.com/SpenceKonde/ATTinyCore

Title: Re: ATTINY in visual micro
Post by Visual Micro on Dec 10th, 2015 at 8:20pm
Thanks for the update.

Yes you can either use the Board manager or unzip into a folder below mydocument/arduino/hardware.

The Visual Micro explorer provides a quick way to auto unpack a hardware core .zip into the correct location and you will also see Board manager and Library Manager tabs

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.