VS Arduino | |
Visual Micro >> General Board >> DUE bin file format
https://www.visualmicro.com/forums/YaBB.pl?num=1461592264 Message started by Gilles Plante on Apr 25th, 2016 at 1:51pm |
Title: DUE bin file format Post by Gilles Plante on Apr 25th, 2016 at 1:51pm
Hi all,
does someone know where I can find a description of the bin file format for the DUE ? I need to know because I will need to edit a string outside the editor to set the serail number of the equipment. And my guess is that there is some form of check value, like a CRC for example I will need to recompute. Many thanks ! |
Title: Re: DUE bin file format Post by Visual Micro on Apr 25th, 2016 at 3:35pm
Not sure. It might be documented here http://www.atmel.com/webdoc/atmelstudio/index.html
|
Title: Re: DUE bin file format Post by Gilles Plante on Apr 25th, 2016 at 7:45pm
Hi Tim,
thanks for the link, unfortunately I haven't found anything about the formatĀ :-[. I googled everything I can think about, haven't found it. Looks like well kept, as the secret of the Caramilk. |
Title: Re: DUE bin file format Post by Visual Micro on Apr 25th, 2016 at 7:52pm
I think it is standard intel format but maybe you can't do it unless you build the hex from the .elf after altering the .elf
You might only need to distribute a couple of the sam tool chain .exe's to do that along with your .elf. Just guessing |
VS Arduino » Powered by YaBB 2.6.12! YaBB Forum Software © 2000-2024. All Rights Reserved. |