I'm a paying customer that has been using your pluggin for VS. While its been extremely useful, I really miss the single step debug feature of the regular VS environment.

Future projects for me are going to be based around the Industruino Proto D21G controller. I've added a link below for more information. While its very close to the arduino zero, its not entirely a match and therefore has its own board definition file.

Can you help with configuring this board for GDB support? Your directions are way over my pay grade and I'll need help.

Thanks

Links:
Product Description:
https://industruino.com/shop/product/industruino-proto-d21g-8

Configuration (board manager):
https://industruino.com/page/techcentre

Board Variant Definitions:
https://github.com/Industruino/IndustruinoSAMD/blob/master/variants/industruino_d21g/variant.h
https://github.com/Industruino/IndustruinoSAMD/blob/master/variants/industruino_d21g/variant.cpp

did  you get a chance to try the debugger?

I've been really busy working on other projects. The process is a bit more than what I originally thought. VM works REALLY well for my needs. Down the road I'll pick it back up and give it a go.

By the way, the intellisense feature works great...Thanks

Great.

When you get time. Debug should just be switching the tool bar from Release to Debug then uploading. That should build OK and pause at an example break-point

Good to hear the main system is working well thanks

vMicro now supports a range of additional hardware debuggers out of the box, including the SAMD platform which should allow this board to work:

SAMD Debugging: https://www.visualmicro.com/page/SAMD-Debugging.aspx

Debugger List: https://www.visualmicro.com/page/DebuggerSupportList.aspx