VS Arduino - Print Page

VS Arduino
Visual Micro >> Microchip Studio (Atmel Studio 7) >> VA Navigation Bar and Intellisense not working https://www.visualmicro.com/forums/YaBB.pl?num=1527185097 Message started by Manny on May 24^th, 2018 at 6:04pm

Title: VA Navigation Bar and Intellisense not working
Post by Manny on May 24^th, 2018 at 6:04pm

Hi, I am having issues where Intellisense is not working even though under edit tab and it show up in Atmel Studio 7. Also, I can not get the VA navigation bar to show up so I can view functions list. This is on my laptop running windows 10. I also use my desktop unit and intellisense and va navigation bar show up. How do I fix/change the setting. I have looked everywhere on the internet and have not found how to configure to work. BTW I have repaired Studio 7 and re-installed VM.

Thanks,

Manny

Title: Re: VA Navigation Bar and Intellisense not working
Post by Visual Micro on May 24^th, 2018 at 6:56pm

Hi,

Visual Micro has not connection to visualassistx. Therefore we need to look at atmel and visualassist config.

If I recall VisualAssist has a menu item called "Enable/Disable VisualAssist". Maybe it's disabled?

Title: Re: VA Navigation Bar and Intellisense not working
Post by Manny on May 24^th, 2018 at 7:42pm

Tim, I got it working it was a config issue in Atmel but I made so many changes don't know which one fixed it. It's not clear in there documentation how to turn on or off.

Thanks,

Title: Re: VA Navigation Bar and Intellisense not working
Post by Visual Micro on May 24^th, 2018 at 7:51pm

Great thanks for the update