Visual Studio Ide for Arduino
https://www.visualmicro.com/forums/YaBB.pl
Other >> Ideas and Suggestions >> Serial terminal: proper processing of CR/LF characters
https://www.visualmicro.com/forums/YaBB.pl?num=1539803780

Message started by SeNS on Oct 17th, 2018 at 8:16pm

Title: Serial terminal: proper processing of CR/LF characters
Post by SeNS on Oct 17th, 2018 at 8:16pm
This will be a really good and useful feature to have proper processing CR/LF from the inbound serial traffic (i.e. received from the board), as it supposed to be for the normal terminal.

So, CR (carriage return) should return (caret/insertion position) to the beginning of a line, and LF (line feed) should do line feed. Simple, isn't it?

But this feature will help to proper format serial output - sometimes it's pretty useful for debugging.

Thanks a lot!

WBR, SeNS

Visual Studio Ide for Arduino » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2019. All Rights Reserved.