VS Arduino - Print Page

VS Arduino
Visual Micro >> Ideas, Suggestions and Related Tools >> Publish server files (spiffs) and com access https://www.visualmicro.com/forums/YaBB.pl?num=1567334043 Message started by Acuario on Sep 1^st, 2019 at 10:34am

Title: Publish server files (spiffs) and com access
Post by Acuario on Sep 1^st, 2019 at 10:34am

When you publish server files (spiffs upload), if the serial monitor is running on the com port the upload fails as it cannot open the com port.

Can you close the port, run the upload, then re-open the com port, makes life easier :)

Title: Re: Publish server files (spiffs/littleFs) and com port access
Post by Acuario on Jul 31^st, 2021 at 8:18am

Did you ever take a look at this? - it still regularly catches me out when not using OTA upload.

I guess it should be quite simple as a normal build/upload or just upload automatically handles the disconnect/connect of the com port - it's just the same process but for the Publish process.

Title: Re: Publish server files (spiffs) and com access
Post by Tim@Visual Micro on Jul 31^st, 2021 at 2:34pm

Thanks, hopefully someone will look at this next week