VS Arduino
>> >> Can't start debugging against an STM32 F303
https://www.visualmicro.com/forums/YaBB.pl?num=1572882570

Message started by Ben Lye on Nov 4th, 2019 at 3:49pm

Title: Can't start debugging against an STM32 F303
Post by Ben Lye on Nov 4th, 2019 at 3:49pm
Out of the box I can't debug an STM32F303, I get this error:


Code (]embedded:startup.tcl:60: Error: Can't find C:\ProgramData\vmicro\tools\openocd-0.10.0.1/scripts/{build.openocdscript}
in procedure 'script'
at file "embedded:startup.tcl", line 60
[/code):



I added a local boards.txt file containing this line and can launch the debugger:

[code]build.openocdscript=target/stm32f3x.cfg


So it seems like some default configuration is missing for the F3 board?

Title: Re: Can't start debugging against an STM32 F303
Post by Simon Hopkinson on Nov 6th, 2019 at 3:42pm
Thanks for the report, and the detail of the configuration.

This will be added into a release, hopefully during the next week.

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.