VS Arduino | |
Visual Micro >> Hardware Debugging (GDB, GDB WiFi, GDB Stub) >> OpenOCD init failed
https://www.visualmicro.com/forums/YaBB.pl?num=1605855807 Message started by Marco (Italy) on Nov 20th, 2020 at 7:03am |
Title: OpenOCD init failed Post by Marco (Italy) on Nov 20th, 2020 at 7:03am
Hi!
Please can you help me with error occours after the last update. I'm using the Atmel debugger/Uploader. :( Compiling 'AMRA_M71_V10' for 'Arduino Due (Native USB Port)' Program size: 56.888 bytes (used 11% of a 524.288 byte maximum) (2,42 secs) Uploading 'AMRA_M71_V10' to 'Arduino Due (Native USB Port)' using 'ATMEL-ICE' Open On-Chip Debugger 0.10.0+dev-01058-g853a05287 (2020-02-13-16:41) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html debug_level: 0 at91sam3X8E ****[vMicro]**** Uploading ELF :in procedure 'program' ** OpenOCD init failed ** Error during upload using programmer The uploader process failed The uploader process failed The uploader returned an error shutdown command invoked |
Title: Re: OpenOCD init failed Post by Marco (Italy) on Nov 20th, 2020 at 8:49am
* SOLVED*
Sorry, was the emulator cable broken! |
VS Arduino » Powered by YaBB 2.6.12! YaBB Forum Software © 2000-2024. All Rights Reserved. |