Hi
I am using VMicro in VS2019
I have the following mcu TTGO T1 16mb QSPI  Please see
https://www.ebay.co.uk/itm/TTGO-T-Display-ESP32-WIFI-BLT-Module-Development-Board-1-14-Inch-LCD-16MB/353395851235?hash=item524808bfe3:g:1zgAAOSwnmxgM4Fz

it is has
FLASH QSPI flash 16MB
SRAM 520 kB SRAM

I can select 16mb (128Mb) under under flash size in VM  but cannot change the partition scheme to anything to take into account the extra memory available. What do I need to do please to setup up larger partition for my chip?
Any help is much appreciated
Chazza

Hi

Visual Micro shows the options provided by the author of the core that you are using. This is the same as how the Arduino IDE works which has the same menu system.

Therefore the first place to ask is on the git site or web site of the author. When you pose the question to them ask how to do that with the Arduino IDE because that is the standard they work too. Visual Micro will automatically show the same.

If you hit a brick wall then let us know here and we will explain how to override the settings if that is possible with that core. Overriding settings in Visual Micro is best as last resort so that project build compatibility with the Arduino IDE is maintained.

I hope this makes sense?

Hi Tim
Thank you for your reply
I do not seem to be getting anywhere with the vendor. If you give me the explanation on how to do this I would be grateful
Regards
Chazza