VS Arduino | |
Visual Micro >> Installation & Troubleshooting >> Creating binary for Arduino Zero w/ Bootloader
https://www.visualmicro.com/forums/YaBB.pl?num=1633126076 Message started by jasonekly214 on Oct 1st, 2021 at 10:07pm |
Title: Creating binary for Arduino Zero w/ Bootloader Post by jasonekly214 on Oct 1st, 2021 at 10:07pm
In the Arduino IDE the "export compiled binary" button will create a .bin for the sketch, and a .bin for the sktech with the bootloader. However VisualMicro seems to only create the sketch .bin.
Is there a setting, or what flag can I change, to get it to create the .bin with the bootloader? I need to pass the binary to a coworker to load onto his processor. |
Title: Re: Creating binary for Arduino Zero w/ Bootloader Post by Simon@Visual Micro on Oct 5th, 2021 at 1:25pm
Thanks for the report.
We are currently investigating this issue, and we will update when there is a fixed release available. |
Title: Re: Creating binary for Arduino Zero w/ Bootloader Post by Simon@Visual Micro on Oct 21st, 2021 at 3:57pm
Please try the latest release (21.09.17.5) which should resolve this issue, available at the top of the board below:
https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES |
VS Arduino » Powered by YaBB 2.6.12! YaBB Forum Software © 2000-2024. All Rights Reserved. |