Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Arduino code via ATMEL ICE over JTAG too complicated ... (Read 2452 times)
Schlueri
Newbies
*
Offline



Posts: 4
Arduino code via ATMEL ICE over JTAG too complicated ...
Jun 3rd, 2015 at 9:26am
 
Hi all !
I have some SODAQ boards connected to ATMEL Studio + VM (latest rev.) In the Arduino IDE all is working fine but the board is not recognized in the VM environment ... so i tried an ATMEL ICE this is working but there is no automatic built process possible ... i have to perform many clicks to program the target "manually"  Sad does somebody have an idea to get a connection from the autobuilder to a JTAG connected target ?
Thank you in advance !
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10464
United Kingdom
Re: Arduino code via ATMEL ICE over JTAG too complicated ...
Reply #1 - Jun 3rd, 2015 at 9:28am
 
What do you mean the board is not recognized
Back to top
 
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print