Apr 23rd, 2024 at 8:14am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Other Hardware › Arduino code via ATMEL ICE over JTAG too complicated ...
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Arduino code via ATMEL ICE over JTAG too complicated ... (Read 3395 times)
Schlueri
Newbies
*
Offline


Posts: 4
Joined: Jun 3rd, 2015
Arduino code via ATMEL ICE over JTAG too complicated ...
Jun 3rd, 2015 at 8:26am
Print Post  
Hi all !
I have some SODAQ boards connected to ATMEL Studio + VM (latest rev.) In the Arduino IDE all is working fine but the board is not recognized in the VM environment ... so i tried an ATMEL ICE this is working but there is no automatic built process possible ... i have to perform many clicks to program the target "manually"  Sad does somebody have an idea to get a connection from the autobuilder to a JTAG connected target ?
Thank you in advance !
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12076
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Arduino code via ATMEL ICE over JTAG too complicated ...
Reply #1 - Jun 3rd, 2015 at 8:28am
Print Post  
What do you mean the board is not recognized
  
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.