Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
JTAG - Native USB port (Read 318 times)
Leen
Junior Member
**
Offline



Posts: 12
JTAG - Native USB port
Dec 21st, 2018 at 10:21am
 
Hallo,

I use Atmel Studio 7 or the Arduino 1.8.5 IDE
And I use Windows 7

I have my own system with the ATSAM3X8E CU
With a JTAG port and a USB port ( Native USB port )
I have make a mistake with the JTAG port signal TCK don't have an connection with the program connector.
So the JTAG programming does not work.
Then have I tried it with the ( Native USB port )
But he does not recognize port from my own system.
With the arduino DUE works it OK.
Maybe you can give a tip about the problem
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 9917
United Kingdom
Re: JTAG - Native USB port
Reply #1 - Dec 21st, 2018 at 1:36pm
 
If you set the programmer in visual micro to "Atmel Studio Device Programming" and set "Always Use Programmer" then we hand over to standard atmel studio device tools for upload.
Back to top
 
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print