VS Arduino - changing ARM/AVR device project

Apr 19^th, 2024 at 2:31pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

changing ARM/AVR device project (Read 2323 times)

Nettuno Newbies Offline Posts: 2 Joined: Feb 4^th, 2019	changing ARM/AVR device project Feb 4^th, 2019 at 12:32pm	Print Post
	Good morning, I'm setup all the environment AS7.0+VS+VM+Atmel Ice (+....???). I find it a monster difficult to align. My lack! QUESTION Although importing Arduino project as UNO in VM toolbar, I find ARM as device target (and platform) in AS project proprierties and cannot change with AVR. Where I'm wrong, please? Thank you
	« Last Edit: Feb 4^th, 2019 at 4:27pm by Nettuno »

	IP Logged

Nettuno Newbies Offline Posts: 2 Joined: Feb 4^th, 2019	Re: changing ARM/AVR device project Reply #1 - Feb 5^th, 2019 at 3:25pm	Print Post
	Ok, due to waiting I solved by myself. Thanks.


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: changing ARM/AVR device project Reply #2 - Feb 5^th, 2019 at 3:30pm	Print Post
	Sorry I missed this post. When you create or open a project for the first time make sure you have the correct board set then visual micro will create the correct project type. Atmel has different project type (.cppproj) for 8bit and 32bit projects so you need to be using the correct project type. Corrective action ... Close the project, delete the .cppproj file, select the correct board (such as Uno), then click "File>Open>Arduino project" and select the .ino.
	« Last Edit: Feb 5^th, 2019 at 3:31pm by Tim@Visual Micro »

	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›