Visual Studio Ide for Arduino - How can i install STM32Duino in Visual Micro

Welcome, Guest. Please Login or Register

When Logging a Support Issue in the Forum, please ensure you have also:- Enabled vMicro > Compiler > Show Build Properties and Verbose Re-Compile your program with these settings enabled	Save the new Output to a Text File and.... Attach it to your post OR Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you

Visual Studio Ide for Arduino › Other › Other Hardware › How can i install STM32Duino in Visual Micro

‹ Previous Topic | Next Topic ›

Pages: 1

How can i install STM32Duino in Visual Micro (Read 216 times)

stnih07

Newbies

Offline

Posts: 7

How can i install STM32Duino in Visual Micro
May 11^th, 2019 at 10:30pm

Hello,

I'm using Visual Micro with Atmel Studio 6.2 for 8-bit Atmel Avr's.
I am starting STM32 population and i want to use Visual Micro with Atmel Studio 6.2 becuse i like its and very useful.

Therefore, I did the following link operations respectively.
https://github.com/stm32duino/wiki/wiki/Getting-Started

And STM32Duino is working on ArduinoIDE without any problems.
I checked the files after installation.

Arduino Files in :

C:\Program Files (x86)\Arduino_1.8.9

STM32Duino Files :

C:\Users\STNIH\AppData\Local\Arduino15

Following,

Open Atmel Studio 6.2

Tools >> Visual Micro >> Configure Ide Locations
Select >> C:\Program Files (x86)\Arduino_1.8.9

That is ok but STM32Duino features don't come in like Arduino Ide.

What can I do for it?

How can I define STM32Duino files to Visual Micro?

IP Logged

Visual Micro

Administrator

Offline

Posts: 10146
United Kingdom

Re: How can i install STM32Duino in Visual Micro
Reply #1 - May 14^th, 2019 at 12:44pm

The as6.2 version of visual micro is no longer supported. You can read on our microchip gallery page which was the last arduino version it supported. The download if for existing customers who want to reinstall. AS6.2 is very old!

Why not install AS7?

You might find that the "Arduino_STM" can be installed from zip below mydocuments\arduino\hardware but do not try if you are not expert with arduino. Please use current software to match your current arduino software version.

Tim Leek
home | Reviews and Download

IP Logged

stnih07 Newbies Offline Posts: 7	Re: How can i install STM32Duino in Visual Micro Reply #2 - May 17^th, 2019 at 11:12am I did a clean installation with Visual Studio 7. It's working. Thanks.
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page