Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
How can i install STM32Duino in Visual Micro (Read 253 times)
stnih07
Newbies
*
Offline



Posts: 7
How can i install STM32Duino in Visual Micro
May 11th, 2019 at 10:30pm
 
Hello,

I'm using Visual Micro with Atmel Studio 6.2 for 8-bit Atmel Avr's.
I am starting STM32 population and i want to use Visual Micro with Atmel Studio 6.2 becuse i like its and very useful.

Therefore, I did the following link operations respectively.
https://github.com/stm32duino/wiki/wiki/Getting-Started

And STM32Duino is working on ArduinoIDE without any problems.
I checked the files after installation.

Arduino Files in :

C:\Program Files (x86)\Arduino_1.8.9
STM32Duino Files :

C:\Users\STNIH\AppData\Local\Arduino15

Following,
Open Atmel Studio 6.2

Tools >> Visual Micro >> Configure Ide Locations
Select >> C:\Program Files (x86)\Arduino_1.8.9

That is ok but STM32Duino features don't come in like Arduino Ide.

What can I do for it?

How can I define STM32Duino files to Visual Micro?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10310
United Kingdom
Re: How can i install STM32Duino in Visual Micro
Reply #1 - May 14th, 2019 at 12:44pm
 
The as6.2 version of visual micro is no longer supported. You can read on our microchip gallery page which was the last arduino version it supported. The download if for existing customers who want to reinstall. AS6.2 is very old!

Why not install AS7?

You might find that the "Arduino_STM" can be installed from zip below mydocuments\arduino\hardware but do not try if you are not expert with arduino. Please use current software to match your current arduino software version.
Back to top
 
WWW  
IP Logged
 
stnih07
Newbies
*
Offline



Posts: 7
Re: How can i install STM32Duino in Visual Micro
Reply #2 - May 17th, 2019 at 11:12am
 
I did a clean installation with Visual Studio 7. It's working.
Thanks.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print