Visual Micro - How can i change VECT_TAB

Dec 9^th, 2022 at 6:34am

Welcome, Guest. Please Login or Register

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Enabled vMicro > Compiler > Show Build Properties and Verbose
Re-Compile your program with these settings enabled

Save the new Output to a Text File and....

Click the Reply button and attach as .txt file OR
Click here to Email us with the file attached, and a link to your post

Support requests without the output above may be impossible to answer, so please help us to help you

Visual Micro › Other › Other Hardware › How can i change VECT_TAB_OFFSET?

‹ Previous Topic | Next Topic ›

Pages: 1

How can i change VECT_TAB_OFFSET? (Read 2439 times)

stnih07 Newbies Offline Posts: 7	How can i change VECT_TAB_OFFSET? May 17^th, 2019 at 11:20am Hi, I am using Visual Micro for Arduino_Core_STM32 with STM32F4-DISCO1. Arduino works fine with IDE when I add "Disco.build.extra_flags" in the board.txt file. But when I compile with Visual Micro, there's no change. And no errors What would be the reason?
Back to top	« Last Edit: May 17^th, 2019 at 11:22am by stnih07 » Please Register or Login to the Forum to see File Attachments IP Logged

Tim@Visual Micro Administrator Offline Posts: 11542 United Kingdom	Re: How can i change VECT_TAB_OFFSET? Reply #1 - May 17^th, 2019 at 2:14pm Did you click Re-Scan or Re-Start the ide after making the external change? To review issues like this we need the info requested at the top of the forum. This will answer any questions.
Back to top	Tim Leek home IP Logged

stnih07 Newbies Offline Posts: 7	Re: How can i change VECT_TAB_OFFSET? Reply #2 - May 17^th, 2019 at 2:45pm Yes, I tried both.
Back to top	Please Register or Login to the Forum to see File Attachments IP Logged

Tim@Visual Micro Administrator Offline Posts: 11542 United Kingdom	Re: How can i change VECT_TAB_OFFSET? Reply #3 - May 17^th, 2019 at 4:11pm Thanks for the output. you also need to switch on the compiler>verbose or I can't see exactly which board and option has been selected. There are some changes to extra flags in your core depending on the board options so I need to see the compiler output. Thanks
Back to top	Tim Leek home IP Logged

stnih07 Newbies Offline Posts: 7	Re: How can i change VECT_TAB_OFFSET? Reply #4 - May 17^th, 2019 at 4:21pm Thanks for your quick answers. I added the output.
Back to top	Please Register or Login to the Forum to see File Attachments IP Logged

Tim@Visual Micro

Administrator

Offline

Posts: 11542
United Kingdom

Re: How can i change VECT_TAB_OFFSET?
Reply #5 - May 17^th, 2019 at 5:06pm

Thanks, we can see the VECT_TAB_OFFSET is correct in the compiler output.

Please switch off "vMicro>Compiler>Shared Cache For Cores". Maybe the core cache is not being release correctly when you changed the extra flags. We will look into it but switching it off should resolve.

With this option switched off you will have a core built for each project which is cleaner when changing global compiler settings.

If still an issue then then click "Build.Clean Solution" which cleans the project build cache.

« Last Edit: May 17^th, 2019 at 5:07pm by Tim@Visual Micro »

Tim Leek
home

IP Logged

stnih07 Newbies Offline Posts: 7	Re: How can i change VECT_TAB_OFFSET? Reply #6 - May 17^th, 2019 at 10:43pm I've tried the way you write. it worked this way. Thanks..
Back to top	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page