Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Pages: 1 2 3 
Send Topic Print
Atmel ICE debugger not detected (Read 578 times)
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Atmel ICE debugger not detected
Jul 12th, 2019 at 1:03pm
 
Hi!
I have installed vMicro connect to Atmel ICE debugger (JTAG). My Debugger Atmel is detect by windows10 but in Uploader - Programmer is not decteted , it's empty. Can you help me?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #1 - Jul 12th, 2019 at 1:12pm
 
When you ask questions please give information about your hardware and IDE version or follow the yellow guide at the top of this page to give us the information we require.

There is 1) Upload and 2) Debug.

1)
The programmers list, for upload, works same as Arduino IDE. If your programmer is not listed then give us the info we need and we will try to add it to the next release.

2)
Use the vMicro>Debugger menu or the "Micro Debug Options" tool bar to select your debugger.

Back to top
 
WWW  
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #2 - Jul 12th, 2019 at 1:21pm
 
Hi in my debug menu I have:
Debug: Debug Hardware
Hardware Debugger: Atmel ICE
Compiler Optimization: Default Optimization

but nothing ... do not work no debug and no download firmware
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #3 - Jul 12th, 2019 at 1:25pm
 
With that configuration the download will be serial/usb and the debug will be ICE

It's important that you follow the yellow guide at the top of this page to show us what you have configured and what you are clicking when you attempt to debug.

You need to have the upload working before you focus on debug.

These things are different for many boards so you really need to give us the information to allow us to help you.

If I assume you are using an Arduino board such as AVR or SAM, have you previously uploaded to your board using the ICE in Atmel Studio or other IDE? If so then the Serial uploader will have been destroyed. In this case you will need to be setting the vMicro>Uploader>Programmer to ICE but maybe it is not provided by Arduino. In which case we will add it but you need to give us the information first.
Back to top
 
WWW  
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #4 - Jul 12th, 2019 at 1:34pm
 
Thanks
I'm testing with Aduino DUE (SAM)

I have installed a AS7 and now I have purchase a your license of a commercial vMicro installed with MSVisualSudio Community. The debugger is Atmel ICE
in vMicro I can Compile without errors for Arduino DUE
I can Download the firmware to target Arduino Board and
using the Programming USB port without any problem including the breakpoint setting that work fine.

The problem regarding only if want pass to Atmel debugger at this point vMicro do not detect my debugger.

that all
Back to top
 
 
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #5 - Jul 12th, 2019 at 1:36pm
 
AS7 is still installed, I need to uninstall it?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #6 - Jul 12th, 2019 at 1:39pm
 
No, it's fine to use atmel studio if that is your choice of ide. Atmel can screw with your usb drivers but that's okay if you use atmel.

However you need to be very clear about if you are asking your questions for assistance in atmel studio or visual studio?
Back to top
 
WWW  
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #7 - Jul 12th, 2019 at 1:39pm
 
No, it's fine to use atmel studio if that is your choice of ide. Atmel can screw with your usb drivers but that's okay if you use atmel.

However you need to be very clear about if you are asking your questions for assistance in atmel studio or visual studio?

For the Due you might as well use atmel now that it is installed. In which case follow the guide in red on our atmel page to set atmel studio device programming as your vMicro>uploader>programmer and atmel studio debugging as your vMicro>debugger
Back to top
« Last Edit: Jul 12th, 2019 at 1:40pm by Visual Micro »  
WWW  
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #8 - Jul 12th, 2019 at 1:40pm
 
I need hel only for my Visual Studio
Sir
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #9 - Jul 12th, 2019 at 1:42pm
 
Okay so submit the requested information after build so we can see your settings.
Back to top
 
WWW  
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #10 - Jul 12th, 2019 at 1:47pm
 
Do you mean this error on debug?
Starting: "C:\ProgramData\vmicro\tools\openocd-0.10.0.1\bin/openocd.exe" -d2 -s "C:\ProgramData\vmicro\tools\openocd-0.10.0.1/share/openocd/scripts/" -c "interface cmsis-dap" -c "cmsis_dap_vid_pid 0x03eb 0x2141" -c "set CHIPNAME at91sam3X8E" -c "source [find target/at91samdXX.cfg]"
Starting: "C:\Users\marco\AppData\Local\arduino15\packages\arduino\tools\arm-none-eabi-gcc
\4.8.3-2014q1/bin\arm-none-eabi-gdb.exe" --interpreter=mi
"C:\ProgramData\vmicro\tools\openocd-0.10.0.1\bin/openocd.exe" exited with code 1 (0x1).
Back to top
 
 
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #11 - Jul 12th, 2019 at 1:48pm
 
Micro Build

Compiling 'ArduinoDueProject' for 'Arduino Due (Native USB Port)'
Program size: 42.592 bytes (used 8% of a 524.288 byte maximum) (0,56 secs)
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #12 - Jul 12th, 2019 at 1:49pm
 
That's useful but the yellow box at the top of this page explains what will show us your config.
Back to top
 
WWW  
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #13 - Jul 12th, 2019 at 1:55pm
 
Sorry it's first time that request support. I will send you email as request on your yellow box.
Back to top
 
 
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #14 - Jul 12th, 2019 at 2:00pm
 
how I can create a log file from your vMicro?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #15 - Jul 12th, 2019 at 2:11pm
 
You have to click the Reply button to add a file, you can't use the quick reply on the bottom of this page.

I have received the information from you by email although you did not follow the instruction to enable "show build properties" or "verbose".

However, the information does show an upload issue and I suspect it is because atmel destroyed the serial bootloader when you upload using ICE. You will need to reburn the bootloader or wait until next week when we will add an ICE uploader for the SAM boards.

Code:
Compiling 'ArduinoDueProject' for 'Arduino Due (Native USB Port)'


ArduinoDueProject.ino:17: In file included from

FastLED.h:14: note  #pragma message  FastLED version 3.002.010

   #    pragma message "FastLED version 3.002.010"

Program size: 42.592 bytes (used 8% of a 524.288 byte maximum) (9,95 secs)


Uploading 'ArduinoDueProject' to 'Arduino Due (Native USB Port)' using 'COM6'

Unable to 'touch' hardware serial port: COM6. Now assuming selected port is bootloader port. This might still fail, have you got the correct board selected?

The uploader process failed

No device found on COM6


 

Back to top
« Last Edit: Jul 12th, 2019 at 2:12pm by Visual Micro »  
WWW  
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #16 - Jul 12th, 2019 at 3:08pm
 
Update. we found the SAm boards are using the wrong .cfg file for the debugger. So next week the release should include an ICE upload and also ICE debugger fix.

Thanks for all the info.
Back to top
 
WWW  
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #17 - Jul 12th, 2019 at 3:12pm
 
Can you inform me when this fixing is ready?
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10142
United Kingdom
Re: Atmel ICE debugger not detected
Reply #18 - Jul 12th, 2019 at 3:22pm
 
Yes we will update this thread
Back to top
 
WWW  
IP Logged
 
MARCO_ITALY
Junior Member
**
Offline



Posts: 32
Re: Atmel ICE debugger not detected
Reply #19 - Jul 12th, 2019 at 3:23pm
 
ok thanks
Back to top
 
 
IP Logged
 
Pages: 1 2 3 
Send Topic Print