Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Cannot compile serial debug on ESP32 : System.IO.DirectoryNotFoundException (Read 99 times)
JoeTester
Newbies
*
Offline



Posts: 1
Cannot compile serial debug on ESP32 : System.IO.DirectoryNotFoundException
Aug 11th, 2019 at 12:01pm
 
Hi. Not sure why I get this error:

System.IO.DirectoryNotFoundException: Could not find a part of the path 'c:\program files (x86)\microsoft visual studio\2017\community\common7\ide\extensions\vyuwgfhs.uzp\Micro Platforms\default\debuggers\VM_DBG\soc'.


Full output :

Board Properties
name=ESP32 Dev Module
upload.tool=esptool_py
upload.maximum_size=3145728
upload.maximum_data_size=327680
upload.wait_for_upload_port=true
serial.disableDTR=true
serial.disableRTS=true
build.mcu=esp32
build.core=esp32
build.variant=esp32
build.board=ESP32_DEV
build.f_cpu=240000000L
build.flash_size=4MB
build.flash_freq=80m
build.flash_mode=dio
build.boot=qio
build.partitions=huge_app
build.defines=
menu.PSRAM.disabled=Disabled
menu.PSRAM.disabled.build.defines=
menu.PSRAM.enabled=Enabled
menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
menu.PartitionScheme.default.build.partitions=default
menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
menu.PartitionScheme.defaultffat.build.partitions=default_ffat
menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
menu.PartitionScheme.minimal.build.partitions=minimal
menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
menu.PartitionScheme.no_ota.build.partitions=no_ota
menu.PartitionScheme.no_ota.upload.maximum_size=2097152
menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
menu.PartitionScheme.noota_3g.build.partitions=noota_3g
menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
menu.PartitionScheme.huge_app.build.partitions=huge_app
menu.PartitionScheme.huge_app.upload.maximum_size=3145728
menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FAT)
menu.PartitionScheme.fatflash.build.partitions=ffat
menu.CPUFreq.240=240MHz (WiFi/BT)
menu.CPUFreq.240.build.f_cpu=240000000L
menu.CPUFreq.160=160MHz (WiFi/BT)
menu.CPUFreq.160.build.f_cpu=160000000L
menu.CPUFreq.80=80MHz (WiFi/BT)
menu.CPUFreq.80.build.f_cpu=80000000L
menu.CPUFreq.40=40MHz (40MHz XTAL)
menu.CPUFreq.40.build.f_cpu=40000000L
menu.CPUFreq.26=26MHz (26MHz XTAL)
menu.CPUFreq.26.build.f_cpu=26000000L
menu.CPUFreq.20=20MHz (40MHz XTAL)
menu.CPUFreq.20.build.f_cpu=20000000L
menu.CPUFreq.13=13MHz (26MHz XTAL)
menu.CPUFreq.13.build.f_cpu=13000000L
menu.CPUFreq.10=10MHz (40MHz XTAL)
menu.CPUFreq.10.build.f_cpu=10000000L
menu.FlashMode.qio=QIO
menu.FlashMode.qio.build.flash_mode=dio
menu.FlashMode.qio.build.boot=qio
menu.FlashMode.dio=DIO
menu.FlashMode.dio.build.flash_mode=dio
menu.FlashMode.dio.build.boot=dio
menu.FlashMode.qout=QOUT
menu.FlashMode.qout.build.flash_mode=dout
menu.FlashMode.qout.build.boot=qout
menu.FlashMode.dout=DOUT
menu.FlashMode.dout.build.flash_mode=dout
menu.FlashMode.dout.build.boot=dout
menu.FlashFreq.80=80MHz
menu.FlashFreq.80.build.flash_freq=80m
menu.FlashFreq.40=40MHz
menu.FlashFreq.40.build.flash_freq=40m
menu.FlashSize.4M=4MB (32Mb)
menu.FlashSize.4M.build.flash_size=4MB
menu.FlashSize.2M=2MB (16Mb)
menu.FlashSize.2M.build.flash_size=2MB
menu.FlashSize.2M.build.partitions=minimal
menu.FlashSize.16M=16MB (128Mb)
menu.FlashSize.16M.build.flash_size=16MB
menu.FlashSize.16M.build.partitions=ffat
menu.UploadSpeed.921600=921600
menu.UploadSpeed.921600.upload.speed=921600
menu.UploadSpeed.115200=115200
menu.UploadSpeed.115200.upload.speed=115200
menu.UploadSpeed.256000.windows=256000
menu.UploadSpeed.256000.upload.speed=256000
menu.UploadSpeed.230400.windows.upload.speed=256000
menu.UploadSpeed.230400=230400
menu.UploadSpeed.230400.upload.speed=230400
menu.UploadSpeed.460800.linux=460800
menu.UploadSpeed.460800.macosx=460800
menu.UploadSpeed.460800.upload.speed=460800
menu.UploadSpeed.512000.windows=512000
menu.UploadSpeed.512000.upload.speed=512000
menu.DebugLevel.none=None
menu.DebugLevel.none.build.code_debug=0
menu.DebugLevel.error=Error
menu.DebugLevel.error.build.code_debug=1
menu.DebugLevel.warn=Warn
menu.DebugLevel.warn.build.code_debug=2
menu.DebugLevel.info=Info
menu.DebugLevel.info.build.code_debug=3
menu.DebugLevel.debug=Debug
menu.DebugLevel.debug.build.code_debug=4
menu.DebugLevel.verbose=Verbose
menu.DebugLevel.verbose.build.code_debug=5
menu.UploadSpeed.256000=256000
menu.UploadSpeed.512000=512000
runtime.ide.path=F:\Derek\Arduino
runtime.os=windows
build.system.path=C:\Users\Derek\AppData\Local\arduino15\packages\esp32\hardware
\esp32\1.0.2\system
runtime.ide.version=10809
target_package=esp32
target_platform=esp32
runtime.hardware.path=C:\Users\Derek\AppData\Local\arduino15\packages\esp32\hard
ware\esp32
originalid=esp32
intellisense.tools.path={compiler.toolchain.path}
intellisense.include.paths={runtime.tools.xtensa-esp32-elf-gcc.path}\lib\gcc\xte
nsa-esp32-elf\5.2.0\include;{runtime.tools.xtensa-esp32-elf-gcc.path}\xtensa-esp
32-elf\include\c++\5.2.0\xtensa-esp32-elf;{runtime.tools.xtensa-esp32-elf-gcc.pa
th}\xtensa-esp32-elf\include;{runtime.tools.xtensa-esp32-elf-gcc.path}\xtensa-es
p32-elf\include\c++\5.2.0;{runtime.tools.xtensa-esp32-elf-gcc.path}\include\c++\
5.2.0;{runtime.tools.xtensa-esp32-elf-gcc.path}\include;{runtime.tools.xtensa-es
p32-elf-gcc.path}\include\include;
tools.wwwfiles.name=ESP32 Sketch Data Upload
tools.wwwfiles.ssh=false
tools.wwwfiles.cmd.windows=ESP32FSUpload.exe
recipe.wwwfiles.upload.pattern="{vm.path}/{tools.wwwfiles.cmd}" -serial.port={serial.port} -build.path="{build.path}" -target_platform="{target_platform}" -runtime.tools.mkspiffs.path="{runtime.tools.mkspiffs.path}" -board.name="{name}" -upload.verbose={upload.verbose} -upload.resetmethod={upload.resetmethod} -upload.speed={upload.speed}  -platform.path="{platform.path}" -project.name="{project.name}" -project.path="{project.path}" -tools.esptool.cmd="{tools.esptool.cmd}" -tools.esptool.cmd.windows="{tools.esptool.cmd.windows}" -runtime.tools.esptool.path="{runtime.tools.esptool.path}" -compiler.path="{compiler.path}" -build.spiffs_start="{build.spiffs_start}" -build.spiffs_end="{build.spiffs_end}" -build.spiffs_pagesize="{build.spiffs_pagesize}" -build.spiffs_blocksize="{build.spiffs_blocksize}" -build.partitions="{build.partitions}" -network.password={network.password} -network.auth_upload={network.auth_upload} -network.port={network.port} -upload.tool={upload.tool} -tools.esptool_py.cmd="{tools.esptool_py.cmd}" -tools.esptool_py.cmd.windows="{tools.esptool_py.cmd.windows}" -runtime.tools.esptool_py.path="{runtime.tools.esptool_py.path}" -build.flash_mode={build.flash_mode} -build.flash_freq={build.flash_freq}
exceptions.serial.enabled=true
exceptions.serial.messages={vm.platform.root.path}/hardware/esp32/exceptions.txt

exceptions.serial.regex.exception_number=Exception \(([0-9]*)\):
exceptions.serial.regex.stack_addresses=40[0-2][0-9a-f]{5}\b
exceptions.serial.resolve.addr2line.args=-aipfC -e"{build.path}/{build.project_name}.elf"
exceptions.serial.resolve.addr2line.cmd=xtensa-esp32-elf-addr2line
exceptions.serial.resolve.stack_addresses.pattern="{compiler.path}{addr2line.cmd
}" {addr2line.args} {stack_addresses.list}
upload.8dot3=false
tools.openocd.debug.path={runtime.tools.openocd-espressif-esp32-10.0.1.path}
tools.openocd.debug.cmd=bin/openocd.exe
tools.openocd.debug.cmd.windows=bin/openocd.exe
tools.openocd.debug.params.verbose=-d2
tools.openocd.debug.openocdscript=esp-wroom-32.cfg
tools.openocd.debug.args={params.verbose} -l "{{build.path}/{build.project_name}_DebugOpenOCD.log}" -s "{path}/share/openocd/scripts/" -f "{path}/share/openocd/scripts/interface/{build.openocddebugger}" -c "set ESP32_RTOS none" -f "{path}/share/openocd/scripts/board/{openocdscript}" -c "init"
tools.openocd.debug.address=localhost:3333
tools.esp32devkit.server.build.openocddebugger=ftdi/esp32_devkitj_v1.cfg
tools.esp32devkit.args=-ex "set remote hardware-watchpoint-limit 2" -ex "mon reset halt" -ex "flushregs" -ex "thb app_main" -ex "c"
tools.esp32devkit.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.esp32devkit.cmd=xtensa-esp32-elf-gdb.exe
tools.esp32devkit.pattern="{path}/{cmd}" {args}
tools.esp32devkit.server.tool=openocd
tools.esp32prog.server.build.openocddebugger=ftdi/minimodule-lowcost.cfg
tools.esp32prog.args=-ex "set remote hardware-watchpoint-limit 2" -ex "mon reset halt" -ex "flushregs" -ex "thb app_main" -ex "c"
tools.esp32prog.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.esp32prog.cmd=xtensa-esp32-elf-gdb.exe
tools.esp32prog.pattern="{path}/{cmd}" {args}
tools.esp32prog.server.tool=openocd
tools.f2232h.server.build.openocddebugger=ftdi/minimodule-lowcost.cfg
tools.f2232h.args=-ex "set remote hardware-watchpoint-limit 2" -ex "mon reset halt" -ex "flushregs" -ex "thb app_main" -ex "c"
tools.f2232h.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.f2232h.cmd=xtensa-esp32-elf-gdb.exe
tools.f2232h.pattern="{path}/{cmd}" {args}
tools.f2232h.server.tool=openocd
tools.f2232mm.server.build.openocddebugger=ftdi/minimodule.cfg
tools.f2232mm.args=-ex "set remote hardware-watchpoint-limit 2" -ex "mon reset halt" -ex "flushregs" -ex "thb app_main" -ex "c"
tools.f2232mm.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.f2232mm.cmd=xtensa-esp32-elf-gdb.exe
tools.f2232mm.pattern="{path}/{cmd}" {args}
tools.f2232mm.server.tool=openocd
tools.olimexarmusbtiny.server.build.openocddebugger=ftdi/olimex-jtag-tiny.cfg
tools.olimexarmusbtiny.cmd=xtensa-esp32-elf-gdb.exe
tools.olimexarmusbtiny.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.olimexarmusbtiny.pattern="{path}/{cmd}"
tools.olimexarmusbtiny.server.tool=openocd
tools.olimexarmusbtiny.server.args={params.verbose} -s "{path}/share/openocd/scripts/" -c "adapter_khz 1000" -f "{path}/share/openocd/scripts/interface/{build.openocddebugger}" -c "set ESP32_RTOS none" -f "{path}/share/openocd/scripts/board/{openocdscript}" -c "init; reset halt"
tools.olimexarmusbtinyh.server.build.openocddebugger=ftdi/olimex-jtag-tiny-h.cfg

tools.olimexarmusbtinyh.cmd=xtensa-esp32-elf-gdb.exe
tools.olimexarmusbtinyh.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.olimexarmusbtinyh.pattern="{path}/{cmd}"
tools.olimexarmusbtinyh.server.tool=openocd
tools.olimexarmusbtinyh.server.args={params.verbose} -s "{path}/share/openocd/scripts/" -c "adapter_khz 1000" -f "{path}/share/openocd/scripts/interface/{build.openocddebugger}" -c "set ESP32_RTOS none" -f "{path}/share/openocd/scripts/board/{openocdscript}" -c "init; reset halt"
tools.jlink.server.build.openocddebugger=jlink.cfg
tools.jlink.cmd=xtensa-esp32-elf-gdb.exe
tools.jlink.args=-ex "set remote hardware-watchpoint-limit 2" -ex "mon reset halt" -ex "flushregs" -ex "thb app_main" -ex "c"
tools.jlink.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.jlink.pattern="{path}/{cmd}" {args}
tools.jlink.server.tool=openocd
debug_menu.hwdebugger.esp32devkit=ESP32 DEVKIT
debug_menu.hwdebugger.esp32devkit.debug.tool=esp32devkit
meta_esp32devkit.sentence=This debugger will require some the jumper configuration to be set correctly to allow debugging
meta_esp32devkit.comment=Jumper settings can be found at the below link, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to  > 'No Optimization' to ensure correct debugging (NOTE: This might cause compilation errors with certain code such as HardwareSerial.)
meta_esp32devkit.image.connect=https://docs.espressif.com/projects/esp-idf/en/la
test/hw-reference/get-started-wrover-kit.html#setup-options
meta_esp32devkit.image.operation=https://www.visualmicro.com/pics/Debug-Break-ESP32-FT2232H-VSOnly.png
meta_esp32devkit.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.esp32prog=ESP32 PROG
debug_menu.hwdebugger.esp32prog.debug.tool=esp32prog
meta_esp32prog.sentence=This debugger will require some wiring to connect it to your target ESP32 board
meta_esp32prog.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to  > 'No Optimization' to ensure correct debugging (NOTE: This might cause compilation errors with certain code such as HardwareSerial.)
meta_esp32prog.image.connect=https://www.visualmicro.com/pics/Debug-Help-ESP32-JTAG-Connections.png
meta_esp32prog.image.operation=https://www.visualmicro.com/pics/Debug-Break-ESP32-FT2232H-VSOnly.png
meta_esp32prog.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.f2232h=F2232H Dual RS232
debug_menu.hwdebugger.f2232h.debug.tool=f2232h
meta_f2232h.sentence=This debugger will require some wiring to connect it to your target ESP32 board
meta_f2232h.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to  > 'No Optimization' to ensure correct debugging (NOTE: This might cause compilation errors with certain code such as HardwareSerial.)
meta_f2232h.image.connect=https://www.visualmicro.com/pics/Debug-Help-ESP32-FT2232H-Connections.png
meta_f2232h.image.operation=https://www.visualmicro.com/pics/Debug-Break-ESP32-FT2232H-VSOnly.png
meta_f2232h.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.f2232mm=F2232 MiniModule
debug_menu.hwdebugger.f2232mm.debug.tool=f2232mm
meta_f2232mm.sentence=This debugger will require some wiring to allow it to function, and connect to your target ESP32 board
meta_f2232mm.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to  > 'No Optimization' to ensure correct debugging (NOTE: This might cause compilation errors with certain code such as HardwareSerial.)
meta_f2232mm.image.operation=https://www.visualmicro.com/pics/Debug-Break-ESP32-FT2232MM-VSOnly.png
meta_f2232mm.image.connect=https://www.visualmicro.com/pics/Debug-Help-ESP32-FT2232MM-Connections.png
meta_f2232mm.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.olimexarmusbtiny=Olimex ARM-USB-TINY
debug_menu.hwdebugger.olimexarmusbtiny.debug.tool=olimexarmusbtiny
meta_olimexarmusbtiny.sentence=This debugger will require some wiring to connect it to your target ESP32 board
meta_olimexarmusbtiny.comment=Wiring can be found in the below image, and the 'https://zadig.akeo.ie/' tool is required to replace the USB Driver on Interface 0 with 'WinUSB'. Set vMicro > Debugger > 'Compiler Optimization' to  > 'No Optimization' to ensure correct debugging (NOTE: This might cause compilation errors with certain code such as HardwareSerial.)
meta_olimexarmusbtiny.image.connect=https://www.visualmicro.com/pics/Debug-Help-ESP32-JTAG-Connections.png
meta_olimexarmusbtiny.image.operation=https://www.visualmicro.com/pics/Debug-Break-ESP32-OlimexARMUSBTiny-VSOnly.png
meta_olimexarmusbtiny.reference.usage.url=https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-Tutorial.html
debug_menu.hwdebugger.olimexarmusbtinyh=Olimex ARM-USB-TINY-H
debug_menu.hwdebugger.olimexarmusbtinyh.debug.tool=olimexarmusbtinyh
meta_olimexarmusbtinyh.sentence=This deb
Back to top
 
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10473
United Kingdom
Re: Cannot compile serial debug on ESP32 : System.IO.DirectoryNotFoundException
Reply #1 - Aug 11th, 2019 at 1:25pm
 
Please attach your output as a .txt file because the forum will only show the first part which is not so useful.

Thanks
Back to top
 
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print