Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Error when using STM32duino core (Read 77 times)
EzekielGavin
Newbies
*
Offline



Posts: 1
Error when using STM32duino core
Mar 23rd, 2020 at 7:25am
 
Hello, long time user of Vm, thank you again, it's fantastic.

Using IDE Arduino 1.6/1.8
I installed the STM32duino core and everything went fine.
I choose the 'board' Nucleo 64 and the options are filled out correctly.

Vmicro -> New Arduino Project -> 'test2'

I then get the msg below

Err Dialog Box says:
"The project 'test2' contains a device 'ATSAM3X8E'  which is not supported by Atmel Studio. Please select
another device.

I do not know why I am getting this as the correct device is set up in Vm.

Any help is appreciated.
Back to top
 

[url=https://testmyspeed.onl/][color=#333333]https
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10561
United Kingdom
Re: Error when using STM32duino core
Reply #1 - Mar 23rd, 2020 at 1:31pm
 
Hi

I guess you are using atmel studio? It is not designed for non-atmel hardware and you are using a competitors hardware stm32. VS is recommened.

To make the intellisense work we have to pretend you are using an atmel board. In this case for 32 bit projects we set it to an atmel SAM type board.

It is possible that when you installed atmel studio you did not click to select the options that would give atmel the 32 bit boards?
Back to top
 
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print