Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 20.07.07.1 VS2017/2019 (Read 378 times)
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2142
Joined: Feb 13th, 2019
20.07.07.1 VS2017/2019
Jul 8th, 2020 at 10:16am
Print Post  
Installer Note: If the install for Visual Studio fails, right click and "Open With>Visual Studio Version Selector"

Download Visual Micro 20.07.07.1 for VS2017/2019
  • Library Discovery: Fixed to ensure correct library discovery process is followed with all Location and Architecture depandancies
  • GDB: *New* Local Debug Port selection shown when using Hardware -> GDBStubs / Black Magic Probe, to select Debugging Port separately to Serial Monitor



Download Visual Micro 20.06.30.4 for VS2017/2019
  • Build Paths: Fix for short paths to only be used on specific platforms for sketch code


Download Visual Micro 20.06.30.3 for VS2017/2019

Download Visual Micro 20.06.30.3 for Atmel Studio 7
Download Visual Micro 20.06.30.3 for Atmel Studio 7 (v2Installer)
  • Upload Verification: Fix to ensure if Upload > Verify is disabled, that "upload.verify=" to avoid errors
  • Change: Sketchbook/libraries have priority over architecure/libraries


Download Visual Micro 20.06.30.1 for VS2017/2019
  • Build Paths: Improvement to use shorter 8dot3 filenames as part of build process (reduces path length issues with multiple libraries)
  • ESP8266 UDP Debug: Fix ensuring connections handled correctly for this variant


Download Visual Micro 20.06.30.0 for VS2017/2019

Download Visual Micro CLI 20.06.18.4

Download Visual Micro 20.06.18.0 for Atmel Studio 7
Download Visual Micro 20.06.18.0 for Atmel Studio 7 (v2Installer)

  • GDB: Fix for DUE Native USB Uploads via Atmel ICE and JLink to set correct GPNVM Bits after Erase Reported Here
  • Intellisense: Improvement when adding Libraries to Project
  • GDB: Seperation of Start Debugging and Attach to Process commands for all OpenOCD Debuggers, ensuring Start Debugging resets board, and Attach To Process does not.
    (Affects: AtmelICE, JLink, STLink, FT2232H, FT2232MM, Olimex USB + Tiny, ESP32 PROG/DEVKIT)
  • GDB: Teensy 3/4 GDB Stub Integration
  • CLI new property to override build path -builder.build_temp_path=
  • GDB and error reporting line number were 1 line wrong. Applied to the project_name.ino only.
  • The NoIDE option was missing all hardware debuggers.

« Last Edit: Jul 8th, 2020 at 11:57am by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint