Visual Micro - 'generic' 328PB as target

Aug 2^nd, 2021 at 5:18pm

Welcome, Guest. Please Login or Register

When Logging a Support Issue in the Forum, please ensure you have also:- Enabled vMicro > Compiler > Show Build Properties and Verbose Re-Compile your program with these settings enabled	Save the new Output to a Text File and.... Click the Reply button and attach as .txt file OR Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you

Visual Micro › › › 'generic' 328PB as target

‹ Previous Topic | Next Topic ›

Pages: 1

'generic' 328PB as target (Read 281 times)

TTSS

Newbies

Offline

Posts: 2

'generic' 328PB as target
Jan 28^th, 2021 at 11:27pm

Hello All,
Is it possible to compile and upload to a 'generic' 328PB board through Visual Micro? This 'generic' board is just a ATMega328PB, a crystal, and an ISP port. Well, and a few bypass caps and a pull-up on reset. I'm using an AVR-ICE as the programmer.

The 'issue' seems to me that VisualMicro gets it's list of targets from the loaded boards in the Arduino IDE, not from the target one selects in AS7.

Thoughts? Thank You.
-Jaco

IP Logged

Simon@Visual Micro Administrator Offline Posts: 942	Re: 'generic' 328PB as target Reply #1 - Jan 29^th, 2021 at 4:41pm To use the Arduino cores and libraries, the Arduino board selections (and underlying configuration) has to be used. There appears to be a board package available for Arduino, for the 328PB chip, which may allow this to work using the Arduino Framework: https://github.com/watterott/ATmega328PB-Testing
Back to top	IP Logged

TTSS Newbies Offline Posts: 2	Re: 'generic' 328PB as target Reply #2 - Jan 29^th, 2021 at 6:54pm Thank You Simon. The Wattuino Pro Mini PB is functionally identical to what I'm doing.....a 'generic, bare bones' 328PB. They add a board selection for the Atmel atmega 328PB Xplained mini development board. So this is a step closer.
Back to top	IP Logged

doc arduino Newbies Offline Posts: 8	Re: 'generic' 328PB as target Reply #3 - Jul 5^th, 2021 at 2:03pm Hi, Hello, maybe still helpful. You can go to Micro Explorer -> Manage Libraries > under additional boards add the following line Code: https://mcudude.github.io/MiniCore/package_MCUdude_MiniCore_index.json Read here https://github.com/MCUdude/MiniCore save it, wait a while and restart AS/VS if necessary.
Back to top	« Last Edit: Jul 5^th, 2021 at 10:45pm by Tim@Visual Micro » IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page