VS Arduino - Solved problems debugging using STLINKv2

Apr 24^th, 2024 at 12:00am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › › › Solved problems debugging using STLINKv2

‹ Previous Topic | Next Topic ›

Pages: 1

Solved problems debugging using STLINKv2 (Read 1395 times)

Reinald Newbies Offline Posts: 4 Location: NL Joined: Apr 12^th, 2021	Solved problems debugging using STLINKv2 May 1^st, 2021 at 9:41am	Print Post
	Hi, I didn't know where i had to put this on the forum, but i think this can be useful. I had a lot of problems setting up debugging using a STLINKv2 (with ribbon cable) on a bluepill. i followed the debug troubleshoot and instructions on the website, updated the USB driver of the STM32 STLink driver. the first problem was OpenOCD returning "Error: couldn't bind tcl to socket on port 6666: No error" this means that port 6666 is already in use. after solving this, the upload and debugging was very instable --> after pausing variable values waren't correct and sometimes the debugging suddenly stops. After i downgraded the USB driver to the original driver from the ST website (v2.1.0.0) 8-6-2017. everything works fine.


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Solved problems debugging using STLINKv2 Reply #1 - May 1^st, 2021 at 2:12pm	Print Post
	Thank you for the useful post. We will update the docs.


	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›