Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Z-Uno2 (Beta) Fails to Compile (Read 234 times)
Simon@Visual Micro
Administrator
*****
Offline



Posts: 1459
Z-Uno2 (Beta) Fails to Compile
May 4th, 2022 at 11:41am
 
When trying to upload the code after successful compilation, and now I am getting a different error message which says:

Code:
Needed file "B:\VSMicro\Zuno\Z-Uno2 (Beta)_zuno2\Release\Zuno_ino_signed.bin" doesn't exist. Build the sketch first!
Error during upload using programmer
Needed file "B:\VSMicro\Zuno\Z-Uno2 (Beta)_zuno2\Release\Zuno_ino_signed.bin" doesn't exist. Build the sketch first! 



I have never seen this happen before,

And I am not sure if this file is the file that gets generated when the compile is complete or not.

This is using v3.0.9 of the ZWave Beta core: https://z-uno.z-wave.me/files/z-uno2/package_z-wave2.me_beta_index.json

Please advice,

Roland
Back to top
« Last Edit: May 4th, 2022 at 11:42am by Simon@Visual Micro »  
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline



Posts: 1459
Re: Z-Uno2 (Beta) Fails to Compile
Reply #1 - May 4th, 2022 at 11:46am
 
We have a fix for this available in the next release, we will update when this is available.

Reason Summary:
The issue is the INO file was not correctly cloned in the build folder (since version 2022.0218.01), which then means the zme_make.exe tool could not correctly build the project.
If you look in the build folder when vMicro builds the project, there is no INO file, nor is there any of the core.o/core.d files present, or the bin file which is required for upload.

Back to top
 
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline



Posts: 1459
Re: Z-Uno2 (Beta) Fails to Compile
Reply #2 - May 6th, 2022 at 4:50pm
 
The fix release for this is now available  (22.04.29-1) from the top of the below board:
https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print