VS Arduino - Naming new code tabs

Apr 20^th, 2024 at 9:31am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

Naming new code tabs (Read 1033 times)

WAXO Newbies Offline Posts: 4 Joined: Dec 26^th, 2022	Naming new code tabs Dec 27^th, 2022 at 12:21am	Print Post
	Hi when I try to add code to VS2022 and Visual Micro - Release 22.11.28.15 I don't get any text box to fill the name for the new tabs. Regards Sonny


	IP Logged

WAXO Newbies Offline Posts: 4 Joined: Dec 26^th, 2022	Re: Naming new code tabs Reply #1 - Dec 27^th, 2022 at 1:00pm	Print Post
	First reinstalled VSmicro with no luck. Then unistalled VS 2022 and deleted all information I could find. Reinstalled VS2022 and lnstalled VSmicro from Extensions manager. At last it works! WAXO


	IP Logged

WAXO Newbies Offline Posts: 4 Joined: Dec 26^th, 2022	Re: Naming new code tabs Reply #2 - Dec 27^th, 2022 at 2:01pm	Print Post
	Back to square one, no input box when I tried to make a new code tab and give it a name. No reinstallation this time but I found the problem after some trial/error. I use a HP elitebook with one external curved widescreen. The external screen have a recomended scale factor. That was the problem. When I use 100% scale everything works great. When I think about it I can remember some other software and functions that didn´t liked the recomended scalefactors. No scale factor for me anymoore! WAXO


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Naming new code tabs Reply #3 - Dec 27^th, 2022 at 4:17pm	Print Post
	Thanks for the update. That is interesting. What did you click to "add new file tab"?


	WWW IP Logged

WAXO Newbies Offline Posts: 4 Joined: Dec 26^th, 2022	Re: Naming new code tabs Reply #4 - Dec 28^th, 2022 at 3:10am	Print Post
	I just click Add Code and chosed one of the options, .ino etc. Then a new winndow opens and tell me to enter a name for the new Arduino file. The problem is that there is now place or option to enter any data. My screen then have recomended resolution 3444x1444 pxs and recomended 175% scale factor. When scale factor is set to 150% or less there are no problems. WAXO


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Naming new code tabs Reply #5 - Dec 28^th, 2022 at 3:01pm	Print Post
	Thanks. That option uses the standard windows/vs prompt. It sounds like it might be off screen or on another monitor but we will try. You can add code many ways. For example, see the image to use the standard Visual Studio "Add Item" window. It probably scales better.
	« Last Edit: Dec 28^th, 2022 at 3:02pm by Tim@Visual Micro »
	Please Register or Login to the Forum to see File Attachments
	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›