May 24th, 2025 at 9:04am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Debug does not appear to work after changing LocalSpeed
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Debug does not appear to work after changing LocalSpeed (Read 1727 times)
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Debug does not appear to work after changing LocalSpeed
Oct 9th, 2012 at 12:48pm
Print Post  
If you have altered the LocalSpeed project property then please make sure the speed is correctly shown on the Serial window when a debug session starts. 

If the Serial window is showing the wrong speed then please set it to the correct speed.

This problem is fixed in the release due later this week
« Last Edit: Oct 9th, 2012 at 12:49pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.