Code

C:\arduino-1.0.1\hardware\tools\avr\bin\avr-g++ -c -g -Os -Wall -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega328p -DF_CPU=16000000L -MMD -DUSB_VID=null -DUSB_PID=null -DARDUINO=101 -DVISUALMICRO_COMPILER_VER=1 -I"C:\arduino-1.0.1\hardware\arduino\cores\arduino" -I"C:\arduino-1.0.1\hardware\arduino\variants\standard" -I"C:\arduino-1.0.1\libraries\WiFi" -I"C:\arduino-1.0.1\libraries\WiFi\utility" "C:\arduino-1.0.1\libraries\WiFi\utility\spi_drv.cpp" -o ity\spi_drv.cpp.o"
C:\arduino-1.0.1\hardware\tools\avr\bin\avr-g++ -c -g -Os -Wall -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega328p -DF_CPU=16000000L -MMD -DUSB_VID=null -DUSB_PID=null -DARDUINO=101 -DVISUALMICRO_COMPILER_VER=1 -I"C:\arduino-1.0.1\hardware\arduino\cores\arduino" -I"C:\arduino-1.0.1\hardware\arduino\variants\standard" -I"C:\arduino-1.0.1\libraries\WiFi" -I"C:\arduino-1.0.1\libraries\WiFi\utility" "C:\arduino-1.0.1\libraries\WiFi\utility\wifi_drv.cpp" -o ity\wifi_drv.cpp.o"
C:\arduino-1.0.1\hardware\tools\avr\bin\avr-gcc -Os -Wl,--gc-sections -mmcu=atmega328p -o test.elf" test.cpp.o" .cpp.o" Client.cpp.o" Server.cpp.o" ity\socket.c.o" ity\server_drv.cpp.o" ity\spi_drv.cpp.o" ity\wifi_drv.cpp.o" "C:\Users\studio\AppData\Local\VMicro\Arduino\Builds\vsarduinotest\uno\core.a" -L"C:\Users\studio\AppData\Local\VMicro\Arduino\Builds\vsarduinotest\uno" -lm
C:\arduino-1.0.1\hardware\tools\avr\bin\avr-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 test.elf" test.eep"
C:\arduino-1.0.1\hardware\tools\avr\bin\avr-objcopy -O ihex -R .eeprom test.elf" test.hex"
Binary sketch size: 6710 bytes (of a 32256 byte maximum) (2,5801475 secs)
Compiling 'test2' for 'Arduino Uno'
Build Folder: C:\Users\studio\AppData\Local\VMicro\Arduino\Builds\test2\uno
SketchLibFolders
:\arduino-1.0.1\hardware\tools\avr\lib\gcc\avr\4.3.2\include\;
Summary: Header=1 Prototypes=3 Imports=1
C:\arduino-1.0.1\hardware\tools\avr\bin\avr-g++ -c -g -Os -Wall -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega328p -DF_CPU=16000000L -MMD -DUSB_VID=null -DUSB_PID=null -DARDUINO=101 -DVISUALMICRO_COMPILER_VER=1 -I"C:\arduino-1.0.1\hardware\arduino\cores\arduino" -I"C:\arduino-1.0.1\hardware\arduino\variants\standard" -I"C:\arduino-1.0.1\libraries\EEPROM" "
 

Code

#include <WiFi.h>

char ssid[] = "xxx";� �� //� your network SSID (name)
char pass[] = "yyyy";� // your network password
int status = WL_IDLE_STATUS;� �� // the Wifi radio's status

void setup() {
� //Initialize serial and wait for port to open:
� Serial.begin(9600);
� while (!Serial) {
� � ; // wait for serial port to connect. Needed for Leonardo only
� }
�
� // check for the presence of the shield:
� if (WiFi.status() == WL_NO_SHIELD) {
� � Serial.println("WiFi shield not present");
� � // don't continue:
� � while(true);
� }
�
 // attempt to connect to Wifi network:
� while ( status != WL_CONNECTED) {
� � Serial.print("Attempting to connect to WPA SSID: ");
� � Serial.println(ssid);
� � // Connect to WPA/WPA2 network:� �
� � status = WiFi.begin(ssid, pass);

� � // wait 10 seconds for connection:
� � delay(10000);
� }
� �
� // you're connected now, so print out the data:
� Serial.print("You're connected to the network");
� printCurrentNet();
� printWifiData();

}

void loop() {
� // check the network connection once every 10 seconds:
� delay(10000);
� printCurrentNet();
}

void printWifiData() {
� // print your WiFi shield's IP address:
� IPAddress ip = WiFi.localIP();
� � Serial.print("IP Address: ");
� Serial.println(ip);
� Serial.println(ip);
�
� // print your MAC address:
� byte mac[6];�
� WiFi.macAddress(mac);
� Serial.print("MAC address: ");
� Serial.print(mac[5],HEX);
� Serial.print(":");
� Serial.print(mac[4],HEX);
� Serial.print(":");
� Serial.print(mac[3],HEX);
� Serial.print(":");
� Serial.print(mac[2],HEX);
� Serial.print(":");
� Serial.print(mac[1],HEX);
� Serial.print(":");
� Serial.println(mac[0],HEX);

}

void printCurrentNet() {
� // print the SSID of the network you're attached to:
� Serial.print("SSID: ");
� Serial.println(WiFi.SSID());

� // print the MAC address of the router you're attached to:
� byte bssid[6];
� WiFi.BSSID(bssid);� �
� Serial.print("BSSID: ");
� Serial.print(bssid[5],HEX);
� Serial.print(":");
� Serial.print(bssid[4],HEX);
� Serial.print(":");
� Serial.print(bssid[3],HEX);
� Serial.print(":");
� Serial.print(bssid[2],HEX);
� Serial.print(":");
� Serial.print(bssid[1],HEX);
� Serial.print(":");
� Serial.println(bssid[0],HEX);

� // print the received signal strength:
� long rssi = WiFi.RSSI();
� Serial.print("signal strength (RSSI):");
� Serial.println(rssi);

� // print the encryption type:
� byte encryption = WiFi.encryptionType();
� Serial.print("Encryption Type:");
� Serial.println(encryption,HEX);
� Serial.println();
}