May 22nd, 2025 at 5:37am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Usb/Serial/WiFi Debugging › 1211.04 - Please test
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 1211.04 - Please test (Read 3179 times)
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
1211.04 - Please test
Nov 5th, 2012 at 12:43pm
Print Post  
Hello,

1211.04 has been released and requires testing. The debug upgrade has also been refreshed

The debug upgrade provides a few .cpp/.h files and the visualizations

If you have debug compile problems after applying the latest debug upgrade please run it again and select uninstall then reinstall.

Some people have reported the need to do this and it shows how utterly rubbish the microsoft msi installer system is!!

How can any installation system fail to copy over new cpp/h files??  I really don't know  Cry

The full debug release in a month or two will be combined into the normal plugin installer, so we will only need a single upgrade. 

However we will probably move away from the msi system which causes more wasted development time than any other part of the plugin.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
James Brown
Junior Member
**
Offline


Posts: 46
Location: Near San Diego
Joined: Jul 31st, 2012
Re: 1211.04 - Please test
Reply #1 - Nov 6th, 2012 at 3:18pm
Print Post  
I have never tried MSI installer but have you tried Inno Setup?  Its free and does a good job for me.  Example...
http://www.seti.net/SETINet/Operation/Operation.htm#Spectrum_Analyzer
  
Back to top
Facebook  
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: 1211.04 - Please test
Reply #2 - Nov 6th, 2012 at 6:06pm
Print Post  
Thanks I'll take a look at that. There is also InstallShield which I keep meaning to look at.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.