May 30th, 2025 at 9:38am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Compiler cache fails when switch between 8mhz and 16mhz
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Compiler cache fails when switch between 8mhz and 16mhz (Read 1429 times)
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Compiler cache fails when switch between 8mhz and 16mhz
May 10th, 2013 at 7:35pm
Print Post  
The compiler cache is not detecting the need for an entire re-build when the cpu speed is changed within the current project. This only applies to advanced users. The current fix is to click "Build>Clean Solution" or delete the temp build folder after changing cpu speed.

This has been a problem for a long time and will affect a couple of users.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.