VS Arduino - Intellisense not working

May 20^th, 2025 at 9:18pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

Intellisense not working (Read 4230 times)

wolfgang11 Newbies Offline Posts: 5 Joined: May 25^th, 2013	Intellisense not working May 26^th, 2013 at 6:55pm	Print Post
	in my Atmel Studio 6.1 with Visual Micro the Intellisense function seemed to be switched off. No suggestions are displayed during code entering but coloring is ok. What could be the matter? Wolfgang


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12188 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Intellisense not working Reply #1 - May 26^th, 2013 at 8:11pm	Print Post
	Hi Wolfgang, Please run the installer again and click repair. make sure you are running 1305.21 or higher from the (Beta Channel) of our downloads site and make sure you have not disabled VisualAssistX Does this fix the problem? Thanks Tim
	« Last Edit: May 26^th, 2013 at 8:14pm by Tim@Visual Micro »

	WWW Facebook Twitter YouTube IP Logged

wolfgang11 Newbies Offline Posts: 5 Joined: May 25^th, 2013	Re: Intellisense not working Reply #2 - May 27^th, 2013 at 3:54pm	Print Post
	Hi Tim, yes, installing version 1305.21 fixed the missing Intellisense. Thanks, Wolfgang


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›