Welcome, Guest. Please Login or Register
Arduino IDE for Visual Studio
 
 
When Logging a Support Issue in the Forum, please ensure you have also:-
  • Enabled vMicro > Compiler > Show Build Properties and Verbose
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
Support requests without the output above may be impossible to answer, so please help us to help you
 
  HomeSearch Tutorials & Wiki visualmicro.com LoginHelpRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Burning bootloader (Read 413 times)
Tomek Gorski
Newbies
*
Offline



Posts: 5
Burning bootloader
Aug 1st, 2013 at 8:45pm
 
Hi everyone.
I use visualmicro plugin to program ATTiny85 with Arduino as ISP. It works perfectly, but when i try to burn a bootloader into ATTiny I receive this message: This board does not support the burning of a bootloader. I have to use Arduino IDE to burn bootloaders. Is there any way to do it in visualmicro?
Back to top
« Last Edit: Aug 1st, 2013 at 8:47pm by Tomek Gorski »  
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10146
United Kingdom
Re: Burning bootloader
Reply #1 - Aug 1st, 2013 at 10:08pm
 
Hi,

It might be a bug in recent version we will look into it.

In the meantime you might be able to fix it by copying the programmers.txt file from arduinoide\hardware\arduino to the location of the boards.txt that contains the attiny defs.

Alternatively you can switch on External Editor in the arduino ide File>Preferences then have the sketch open in Arduino and Visual Micro at the same time. Edit with Visual Micro then click upload in Arduino.
Back to top
« Last Edit: Aug 1st, 2013 at 10:09pm by Visual Micro »  
WWW  
IP Logged
 
nablabla
Newbies
*
Offline



Posts: 5
Re: Burning bootloader
Reply #2 - Nov 19th, 2018 at 4:33pm
 
Hi, I have the same problem, not it is 5 years later, any solutions?

Code:
Burning a new bootloader
System.Exception: Programmer can not found for the current board: arduinoasisp
   bei Visual.Micro.MiroAppAPI.debug.AvrdudeUploader.burnBootloader(Board boardPreferences, String programmerName)
Burn failed 



I selected attiny25/45/85 \w attiny85 and Programmer: Arduino as ISP and tried with and without "Always used Programmer for Upload..."
Back to top
« Last Edit: Nov 19th, 2018 at 4:42pm by nablabla »  
 
IP Logged
 
Visual Micro
Administrator
*****
Offline



Posts: 10146
United Kingdom
Re: Burning bootloader
Reply #3 - Nov 20th, 2018 at 6:39pm
 
A lot has changed in 5 years and now we use board manager to install hardware + there are many variations

Please post install instructions for your hardware

Thanks
Back to top
 
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print