VS Arduino - sketches as dll's?

Nov 19^th, 2025 at 9:51pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

sketches as dll's? (Read 7643 times)

GregC Newbies Offline Posts: 2 Location: Easton, Maryland USA Joined: Jan 19^th, 2014	sketches as dll's? Jan 19^th, 2014 at 8:30pm	Print Post
	Hey! I've been a VS programmer for several years, but am new to the micro-controller world. I'm currently working with an Uno with a fingerprint scanner attached. I want to create a Windows app that will communicate serially with the scanner through the Uno. I'm thinking a VB GUI with c++ dll's to handle the communication between computer, Uno and scanner. Can I compile Arduino sketches as dll's? Is there a better way?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12202 Location: United Kingdom Joined: Apr 10^th, 2010	Re: sketches as dll's? Reply #1 - Jan 20^th, 2014 at 2:30am	Print Post
	Hi Greg, Not sure I fully understand but there are lots of examples on the arduino playground and stackoverlow etc. I'll add a few quick tips if I understand correctly. 1) The Arduino code doesn't compile into a windows dll and is always uploaded to the Arduino processor via usb or some other means. The arduino code is capable of sending and receiving Serial. 2) I expect the scanner is connected to some arduino pins and has a library or some sample code. In that case you can combine the reading and printing of serial on the arduino with the scanner code. 3) The Vb windows app can use the System.IO name space to read or write to a windows serial port. So your vb app can show UI controls, buttons etc and can forward the commands via a SerialPort such as COM1 at an agreed baud/speed defined in your sketch when you issue a Serial.begin(baudRate) in your arduino code. Remember that the debugger uses the serial port, this might not be relevant but if it is then post a question and I will point you to a solution. I hope this helps, there are tons of examples out these for the .NET SerialPort class. You don't need C++ on the windows side of things unless you need pin level port control.


	WWW Facebook Twitter YouTube IP Logged

GregC Newbies Offline Posts: 2 Location: Easton, Maryland USA Joined: Jan 19^th, 2014	Re: sketches as dll's? Reply #2 - Jan 20^th, 2014 at 12:50pm	Print Post
	Thanks, Tim. Your comments are on target and helpful. You've given me a different way of approaching this project. The fingerprint scanner has several different modes of operation: enrolling a new finger in its database verifying a finger against that database *receiving and sending data over the serial line just to name a few. You are correct, there are lots of code samples to perform these individual operations. My original approach was to try to download the particular operation I needed at the time, as a sketch, and continuously download different operation sketches as needed, via the vb ui. However, it may be better if I combine all the needed operations as functions in one larger sketch and download only once. Then call each function from my vb ui. This will eliminate the need for dll's or any other code libraries stored on the computer. Do you agree that this is a better approach?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12202 Location: United Kingdom Joined: Apr 10^th, 2010	Re: sketches as dll's? Reply #3 - Jan 20^th, 2014 at 1:12pm	Print Post
	Hi, Yes that makes good sense to me. Best of luck


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›