May 5th, 2025 at 12:35pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
 ‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Installation (Read 3856 times)
Ajit
Newbies
*
Offline


Posts: 2
Location: BANGALORE
Joined: Feb 6th, 2014
Installation
Feb 7th, 2014 at 5:47am
Print Post  
I have Downloaded The visual Micro For Arduino. I have successfully installed.But i tried Option said in main links. But i could not able to see the 
These option
tep 2: Open an existing Arduino sketch as follows:

    Click on File->Open->Arduino Project
    Select an existing sketch in the Arduino project directory.
    Once the project has loaded and opened, select a board from the Boards toolbar.
    Select a programmer from Tools->Arduino->Programmers.
    Press F5 and enjoy.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12187
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Installation
Reply #1 - Feb 7th, 2014 at 1:39pm
Print Post  
Hi,

Please confirm the version of Visual Studio you are using from the help>about

Please also confirm if you have a tool bar with a list of boards and if you were prompted for the location of the Arduino Ide the first time Visual Studio started after install

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Ajit
Newbies
*
Offline


Posts: 2
Location: BANGALORE
Joined: Feb 6th, 2014
Re: Installation
Reply #2 - Feb 10th, 2014 at 5:35am
Print Post  
I am having atmel studio 6 version 6.0.1843

No list of board Being highlighted when visual studio start. Is there way to insert the Image here. I found option could not able to insert it.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12187
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Installation
Reply #3 - Feb 10th, 2014 at 6:03pm
Print Post  
Hi,

Thanks for the info. You are using Atmel Studio 6.0. Visual Micro was released after that for Atmel Studio 6.1.

Please install Atmel Studio 6.1 from here

Then, with Atmel Studio closed, run the Visual Micro installer. Select "Remove". Then run it again and click "Install".

When you subsequently open 6.1 we will expect everything to be OK?

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.