Jul 13th, 2025 at 7:03am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › VM 14.03.0401 COM drop down list
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic VM 14.03.0401 COM drop down list (Read 3929 times)
Jaffer
Junior Member
**
Offline


Posts: 10
Joined: Nov 16th, 2012
VM 14.03.0401 COM drop down list
Mar 7th, 2014 at 5:43am
Print Post  
Not a big issue, but it seems that the COM-port drop down list does not populate. From Tools >> Visual Micro >> Serial Port there is no problem choosing COM-port.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12191
Location: United Kingdom
Joined: Apr 10th, 2010
Re: VM 14.03.0401 COM drop down list
Reply #1 - Mar 7th, 2014 at 6:14pm
Print Post  
Hi,

Thanks we have seen this. The list populates correctly when a board is plugged in or reconnected, seems to be a caching issue we will resolve. 

As you say the tools menu does work and unplug/replug the board will also work then the problem will not happen again within the current ide session.

Thanks for the reminer

ps: The visual micro version is shown on tools>options>visual micro>version. It is similar to the installer version but slightly different. not a problem but might save some time in the future.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Jaffer
Junior Member
**
Offline


Posts: 10
Joined: Nov 16th, 2012
Re: VM 14.03.0401 COM drop down list
Reply #2 - Mar 7th, 2014 at 7:52pm
Print Post  
Tim@Visual Micro wrote on Mar 7th, 2014 at 6:14pm:
Hi,

Thanks we have seen this. The list populates correctly when a board is plugged in or reconnected, seems to be a caching issue we will resolve. 

As you say the tools menu does work and unplug/replug the board will also work then the problem will not happen again within the current ide session.

Thanks for the reminer

ps: The visual micro version is shown on tools>options>visual micro>version. It is similar to the installer version but slightly different. not a problem but might save some time in the future.


Tried some of it you mentioned above, without any difference.
Though, this is for me an non-issue, just cosmetic.

Thanks anyway! 
You are truly doing a great job!

regards,
Jan
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12191
Location: United Kingdom
Joined: Apr 10th, 2010
Re: VM 14.03.0401 COM drop down list
Reply #3 - Mar 7th, 2014 at 8:05pm
Print Post  
Ok will take a look thanks for the message
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.