May 2nd, 2025 at 5:23am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › I'm having same problem as VM tutorial #1.5 on youTube-but no resolution
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic I'm having same problem as VM tutorial #1.5 on youTube-but no resolution (Read 3404 times)
Brian Millier
Junior Member
**
Offline


Posts: 35
Location: Halifax N.S.
Joined: Apr 5th, 2014
I'm having same problem as VM tutorial #1.5 on youTube-but no resolution
Apr 6th, 2014 at 5:32pm
Print Post  
  I am a VM newbie. After installing VM on two different computers, with Studio6.1 and 6.2 respectively, I experience the same problem that is the subject of  VM tutorial #1.5 on YouTube
http://www.youtube.com/watch?v=L2C1tQhZ6co
  Neither of the 2 suggestions resolves the issue for me. It appears that these solutions are targetted more for those doing a VM update, which was not the case for me- both of mine were completely new installs.
  If all of the params in the Properties window are duplicated in Tools/options/Visual Micro,  then I can make changes in there- which is what I am doing currently. However, I am also having debugger problems too.
  Any other things I might try?
Thanks
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: I'm having same problem as VM tutorial #1.5 on youTube-but no resolution
Reply #1 - Apr 6th, 2014 at 6:10pm
Print Post  
Sorry, are you saying you have no project properties in 6.1 and 6.2?

Project properties and tools options are entirely different. You do need the project properties. Please open a sketch project then click the yellow ? on the toolbar next to the board list. Then immediately email a screen dump. thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Brian Millier
Junior Member
**
Offline


Posts: 35
Location: Halifax N.S.
Joined: Apr 5th, 2014
Re: I'm having same problem as VM tutorial #1.5 on youTube-but no resolution
Reply #2 - Apr 6th, 2014 at 6:48pm
Print Post  
I sent the capture- But, then I decided to watch the You-tube again. My mistake! I was selecting the .ino file icon, which I normally do to see code- Not the project icon.
Now I see all of the debug properties that weren't there before.
Sorry about this. Some of my debug problems may stem from not being able to adjust the parameters shown here.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: I'm having same problem as VM tutorial #1.5 on youTube-but no resolution
Reply #3 - Apr 6th, 2014 at 7:01pm
Print Post  
Great, let's see how it goes although I don't expect there are many options that will affect some issues
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.