May 24th, 2025 at 2:19pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › AVRISP MKII not showing on Tool config screen
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 8 Replies) AVRISP MKII not showing on Tool config screen (Read 9932 times)
terryfromphoenix
Junior Member
**
Offline


Posts: 15
Location: Phoenix, AZ
Joined: May 19th, 2014
AVRISP MKII not showing on Tool config screen
May 27th, 2014 at 12:53am
Print Post  
I'm using AtmelStudio version 6.1.2730 - Service Pack 2 under Windows 7. 

When I go to the "Tool" tab and try and select a programmer, the only thing that shows up is "Simulator". 

I have version 1.2.6.0 of the AVRISP driver installed. I've also rebooted several times too. The "Jungo" driver is not installed. 

Under "Tools\Visual Micro\Programmers", I have AVRISP mkII selected. If I go to "Tools\Device Programming" in the Tool combo box, only "Simulator" is available. 

I've rebooted, removed and reinstalled the AVRISP device driver to no avail. 

Does anyone have a clue as to what might be wrong?
« Last Edit: May 27th, 2014 at 12:53am by terryfromphoenix »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: AVRISP MKII not showing on Tool config screen
Reply #1 - May 27th, 2014 at 10:28am
Print Post  
Hi,

Ignore the tool tab

Please click "tools>visual Micro>upload using programmer". This will make normal compile/upload F5/CTRL+F5 use the selected programmer

http://www.visualmicro.com/page/User-Guide.aspx?doc=Tools-Menu.html

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
terryfromphoenix
Junior Member
**
Offline


Posts: 15
Location: Phoenix, AZ
Joined: May 19th, 2014
Re: AVRISP MKII not showing on Tool config screen
Reply #2 - May 27th, 2014 at 7:22pm
Print Post  
That's what I already have selected. When I compile and upload, I get "The uploader returned an error".
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: AVRISP MKII not showing on Tool config screen
Reply #3 - May 27th, 2014 at 8:03pm
Print Post  
Oh I see sorry.

Please switch on tools>options>visual micro>compiler>verbose then attempt upload.

Then email the output to info[at]visualmicro.com

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
terryfromphoenix
Junior Member
**
Offline


Posts: 15
Location: Phoenix, AZ
Joined: May 19th, 2014
Re: AVRISP MKII not showing on Tool config screen
Reply #4 - May 28th, 2014 at 12:50am
Print Post  
Requested data sent.

Thanks, 
Terry
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: AVRISP MKII not showing on Tool config screen
Reply #5 - May 28th, 2014 at 11:52am
Print Post  
Hi Terry,

I must be missing your point.

The output you emailed shows a complete upload with verify, the latter part of the output is shown below.

So please send a screen shot of the error so we can hopefully understand where it appears

Thanks

Quote:
### | 100% 25.85s
 

avrdude: verifying ...

avrdude: 1632 bytes of flash verified

 

avrdude: Sent: . [1d] . [04] . [04] . [00] P [50] . [00] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] P [50] . [00] . [ff] . [00]

avrdude: safemode read 1, lfuse value: ff

avrdude: Sent: . [1d] . [04] . [04] . [00] P [50] . [00] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] P [50] . [00] . [ff] . [00]

avrdude: safemode read 2, lfuse value: ff

avrdude: Sent: . [1d] . [04] . [04] . [00] P [50] . [00] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] P [50] . [00] . [ff] . [00]

avrdude: safemode read 3, lfuse value: ff

avrdude: safemode: lfuse reads as FF

avrdude: Sent: . [1d] . [04] . [04] . [00] X [58] . [08] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] X [58] . [08] . [d8] . [00]

avrdude: safemode read 1, hfuse value: d8

avrdude: Sent: . [1d] . [04] . [04] . [00] X [58] . [08] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] X [58] . [08] . [d8] . [00]

avrdude: safemode read 2, hfuse value: d8

avrdude: Sent: . [1d] . [04] . [04] . [00] X [58] . [08] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] X [58] . [08] . [d8] . [00]

avrdude: safemode read 3, hfuse value: d8

avrdude: safemode: hfuse reads as D8

avrdude: Sent: . [1d] . [04] . [04] . [00] P [50] . [08] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] P [50] . [08] . [fd] . [00]

avrdude: safemode read 1, efuse value: fd

avrdude: Sent: . [1d] . [04] . [04] . [00] P [50] . [08] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] P [50] . [08] . [fd] . [00]

avrdude: safemode read 2, efuse value: fd

avrdude: Sent: . [1d] . [04] . [04] . [00] P [50] . [08] . [00] . [00]

avrdude: Recv: . [1d] . [00] . [00] P [50] . [08] . [fd] . [00]

avrdude: safemode read 3, efuse value: fd

avrdude: safemode: efuse reads as FD

avrdude: safemode: Fuses OK

avrdude: Sent: . [11] . [01] . [01]

avrdude: Recv: . [11] . [00]

avrdude done.  Thank you.

 
Done uploading
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
terryfromphoenix
Junior Member
**
Offline


Posts: 15
Location: Phoenix, AZ
Joined: May 19th, 2014
Re: AVRISP MKII not showing on Tool config screen
Reply #6 - May 28th, 2014 at 8:08pm
Print Post  
I hate to say this but since I put it in verbose mode, it uploads OK. Nothing was changed. In my original bug, only "Simulator" can be selected. I sent you an email with a screenshot of what I'm talking about.

Terry

  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: AVRISP MKII not showing on Tool config screen
Reply #7 - May 28th, 2014 at 8:43pm
Print Post  
Hi,

Okay maybe the clearing of the build files or re-start of ide cleared some initial confused build state Smiley Good to know it's working.

Visual Micro uses the Arduino compatible processes to provide upload capabilities. These are different to the tools supported by Atmel Studio which are much more complicated to use and require some reading to understand.

The device programming window where you can see the simulator is an Atmel Studio tool not a Visual Micro tool. Atmel studio supports different tools for different processors and is also makes intelligent use of usb queries to determine what hardware is connected.

You said that you have not installed Jungo on which case atmel device programming options will be affected.  Options ...

1)
You can have both arduino and atmel working with the same usb system but it's a bit fiddly to configure. We have a not very pretty but useful write up from a user here. It's not pretty because of the copy/paste facility of our blog, not the authors fault.

2)
If you are using an Arduino 1.5 Ide from Visual Micro. You can also install the Jungo drivers and use special extended programmer options that Visual Micro provides. See "Tools>Visual Micro>Programmers>Atmel Studio ....". The Atmel Studio entries in the list relate to programmers using the Jungo drivers and not the Arduino drivers.

Hope this makes sense
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: AVRISP MKII not showing on Tool config screen
Reply #8 - May 28th, 2014 at 8:44pm
Print Post  
Hi,

Okay maybe the clearing of the build files or re-start of ide cleared some initial confused build state Smiley Good to know it's working.

Visual Micro uses the Arduino compatible processes to provide upload capabilities. These are different to the tools supported by Atmel Studio which are much more complicated to use and require some reading to understand.

The device programming window where you can see the simulator is an Atmel Studio tool not a Visual Micro tool. Atmel studio supports different tools for different processors and is also makes intelligent use of usb queries to determine what hardware is connected.

You said that you have not installed Jungo on which case atmel device programming options will be affected.  Options ...

1)
You can have both arduino and atmel working with the same usb system but it's a bit fiddly to configure. We have a not very pretty but useful write up from a user here. It's not pretty because of the copy/paste facility of our blog, not the authors fault. http://www.visualmicro.com/post/2014/01/17/AvrIsp-MkII-Usb-Driver-for-Arduino.as...

2)
If you are using an Arduino 1.5 Ide from Visual Micro. You can also install the Jungo drivers and use special extended programmer options that Visual Micro provides. See "Tools>Visual Micro>Programmers>Atmel Studio ....". The Atmel Studio entries in the list relate to programmers using the Jungo drivers and not the Arduino drivers.

Hope this makes sense
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
terryfromphoenix
Junior Member
**
Offline


Posts: 15
Location: Phoenix, AZ
Joined: May 19th, 2014
Re: AVRISP MKII not showing on Tool config screen
Reply #9 - May 29th, 2014 at 12:26am
Print Post  
Thanks for the info and thanks for your help. You cleared up a few things for me.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.