Jun 8th, 2025 at 10:49am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Installed 10Aug2014 VM. Now VS/VM unusable, USB discovery disables
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Installed 10Aug2014 VM. Now VS/VM unusable, USB discovery disables (Read 3617 times)
stevech
Member
***
Offline


Posts: 147
Location: So. Calif. US
Joined: Jun 16th, 2013
Installed 10Aug2014 VM. Now VS/VM unusable, USB discovery disables
Aug 11th, 2014 at 5:50am
Print Post  
After installing latest version as of this date, when I launch VS 6.1,� a popup says

Visual Micro - Wmi or Network Port Discovery()
Network or Port discovery error. USB ports will be displayed with short names and network discovery will be disabled. Please re-start the ide for new settings to take effect. Visit the visualmicro.com wiki and forum for help.

I am frustrated that the new version did this to me, after the prior version was so good. I have not gone to VS 6.2 because of worry that it will bring new bugs. I only went to the new VS to get the bug fix for updating the .HEX file in the DEBUG folder (which it did, until this USB discovery bug).

At first I could restart and fight and it would again show a list of USB ports in use with boards (I have about 5 going at once, quite often). 

Now all I get is that error pop-up, no USB ports listed.

I searched the wiki and� forum and didn't find a discussion on this.
  
Back to top
 
IP Logged
 
stevech
Member
***
Offline


Posts: 147
Location: So. Calif. US
Joined: Jun 16th, 2013
Re: Installed 10Aug2014 VM. Now VS/VM unusable, USB discovery disables
Reply #1 - Aug 11th, 2014 at 6:08am
Print Post  
Follow-up... exiting/restarting VS didn't cure. 
I rebooted Win7/64 and for now it's working correctly.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12191
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Installed 10Aug2014 VM. Now VS/VM unusable, USB discovery disables
Reply #2 - Aug 11th, 2014 at 10:02am
Print Post  
I'm glad you sorted it and thanks for the update.

Sounds like windows had not fully closed atmel studio. You would have found an atmelstudio.exe resident in memory even after you closed it. If that happens again in the future you can terminate atmelstudio.exe using task manager and avoid a reboot.

Thanks again!
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.